(eTshayina) YY-90 iTyuwa yokuHlola isitshizi -Touch-screen

III.Ukuhlangabezana nomgangatho:

CNS 3627/3885/4159/7669/8886

I-JISD-0201 ; H-8502 ; H-8610; K-5400; Z-2371 ; GB/T1771 ;

ISO 3768 /3769/ 3770 ; I-ASTM B-117/ B-268; I-GB-T2423; GJB 150

IV.Iiparamitha zoBugcisa:

4.1 Ubungakanani beStudio: 90L (600 * 450 * 400mm)

Ubungakanani bangaphandle: W1230 * D780 * H1150mm

4.2 Ubonelelo lwaMandla: 220V

4.3 Imathiriyeli yegumbi:

a. Igumbi lokuvavanya lenziwe ngepleyiti engwevu yePVC enobunzima obuyi-5mm

b. Isitywina sesigqubuthelo selabhoratri senziwe ngepleyiti ecacileyo ye-acrylic enefuthe elinobunzima obuyi-5mm. Umaleko ophindwe kabini ukutyeba ngaphakathi nangaphandle komphetho ukuthintela ukugqwetheka ngenxa yobushushu obuphezulu bexesha elide.

c. Ibhotile efihliweyo efihliweyo yokuvavanya ngokutsha, kulula ukuyicoca, kulula ukuyisebenzisa.

d. Umgqomo womoya woxinzelelo wamkela intsimbi engenasiphene umphanda woxinzelelo oluphezulu onesiphumo esihle sokugquma.

e. I-rack yesampula yovavanyo ithatha uhlobo lolwahlulo lwendiza, i-Angle inokulungelelaniswa ngokungqongqo, inkungu ifana macala onke, inkungu iyaguquguquka ngokupheleleyo, iziphumo zovavanyo zichanekile, kunye nenani leisampulu zovavanyo.

4.4 Uvavanyo lokutshiza ngetyuwa; NSS, ACSS

Ilebhu: 35℃±1℃.

Umphanda womoya woxinzelelo: 47℃±1℃.

4.5 Uvavanyo lokumelana nokubola: I-CASS

Ilebhu: 35℃±1℃.

4.6 Inkqubo yokubonelela ngomoya: Lungisa uxinzelelo lomoya kwi-1Kg / cm2 kwizigaba ezimbini. Icandelo lokuqala lihlengahlengiswa kancinci i-2Kg / cm2, isebenzisa isihluzo somoya esingeniswa ngaphandle, kunye nomsebenzi wokuhambisa amanzi. Inqanaba lesibini lilungelelaniswe ngokuchanekileyo i-1Kg / cm2, i-1/4 yokulinganisa uxinzelelo, ngokuchanekileyo kunye nokubonisa ngokuchanekileyo.

4.7 Indlela yokutshiza:

a. Umgaqo weBernaut ufunxa i-brine kwaye emva koko i-atomize, idigri ye-atomization iyunifomu, akukho nto ithintela icrystallization, inokuqinisekisa uvavanyo oluqhubekayo.

b. I-nozzle yenziwe ngeglasi epholileyo, ekwazi ukulungelelanisa inani lokutshiza kunye ne-Angle yokutshiza.

c. Umthamo wokutshiza ulungelelaniswa ukusuka kwi-1 ukuya kwi-2ml / h (umgangatho we-ml / 80cm2 / h ufuna iiyure ezili-16 zokuvavanya umlinganiselo ophakathi). I-cylinder yokulinganisa ithatha ukufakela eyakhelwe-ngaphakathi, ukubonakala okuhle, ukusebenza lula kunye nokuqwalaselwa, kunye nokunciphisa indawo yokufakela isixhobo.

I-4.8 Inkqubo yokufudumala: Indlela yokufudumala ngokuthe ngqo iyamkelwa, isantya sokufudumala sikhawuleza, kwaye ixesha lokulinda liyancitshiswa. Xa iqondo lobushushu lifikelela, ubushushu obungaguqukiyo butshintsha ngokuzenzekelayo, iqondo lobushushu lichanekile, kunye nokusetyenziswa kwamandla kuphantsi. Umbhobho ococekileyo we-titanium wobushushu, i-asidi kunye nokumelana nokubola kwe-alkali, ubomi benkonzo ende.

4.9 Inkqubo yokulawula:

Itanki yokufudumeza yaselabhoratri ithatha isilawuli sobushushu sokwanda kolwelo 0 ~ 120℃(Italiya EGO). Inkqubo yokongeza amanzi ngesandla isetyenziselwa ukongeza ngesandla umbhobho woxinzelelo kunye nomgangatho wamanzi webhubhoratri ukukhusela umonakalo wesixhobo kwiqondo lokushisa eliphezulu ngaphandle kwamanzi.

4.10 Inkqubo yokususa inkungu: Susa isitshizi setyuwa kwigumbi lovavanyo ngexesha lokuvalwa ukunqanda ukuphuma kwerhasi enomhlwa kwaye yonakalise ezinye izixhobo ezichanekileyo elabhoratri.

4.11 Isixhobo sokhuseleko:

a. Xa inqanaba lamanzi liphantsi, unikezelo lwamandla lucinywa ngokuzenzekelayo, kwaye isixhobo sokukhanya esilumkiso sokhuseleko siboniswa ngamandla.

b. Ngaphezulu kweqondo lobushushu, cima ngokuzenzekelayo unikezelo lwamandla esifudumezi, isilumkiso sokhuseleko isixhobo isibonisi esiguqukayo.

c. Xa inqanaba lamanzi leyeza lovavanyo (amanzi anetyuwa) lisezantsi, isixhobo sokukhanya sokhuseleko siboniswa ngamandla.

e. Umsebenzi wokukhusela ukuvuza ukukhusela ukulimala komntu kunye nokungaphumeleli kwesixhobo esibangelwa ukuvuza komgca okanye isiphaluka esifutshane.

4.12 Ukuhlohla okusemgangathweni:

a. Uhlobo lwe-V-uhlobo / i-O-uhlobo lokugcina i-rack--1 iseti

b. Misilinda yokucoca--1 iipcs

c. Izikhonkwane zesalathisi sobushushu--2 iipcs

d. Umqokeleli---1 iipcs

e. Gumlomo wombhobho--1 iipcs

f. Hikomityi yomdidi--1 iipcs

g. Gisihluzo se-lass--1 iipcs

h. Inqaba yokutshiza--Iseti e-1

i. Ainkqubo yokuzaliswa kwamanzi utomatic--1 iseti

j. Fog ukususwa inkqubo---1 iseti

k. Uvavanyo lwe-sodium chloride (500g / ibhotile)--2iibhotile

m. Pi-emele yokunqanda umhlwa (i-5ml yekomityi yokulinganisa)--1pcs

n. Numlomo--1pcs

V. Imeko engqongileyo:

1. Ukunikezelwa kwamandla: 220V 15A 50HZ

2. Sebenzisa iqondo lobushushu malunga ne:5 ~ 30℃

3. Umgangatho wamanzi:

(1). Ulwabiwo lolwelo lovavanyo -- amanzi adiliweyo (amanzi asulungekileyo) (ixabiso le-HP kufuneka libe phakathi kwe-6.5 kunye ne-7.2)

(2) Amanzi aseleyo - amanzi etephu

4. Ukusetha uxinzelelo lomoya

(1). Uxinzelelo lokutshiza -- 1.0±0.1kgf/cm2

(2). Isihluzi sokulawula uxinzelelo lwecompressor yomoya -- 2.0 ~ 2.5kgf/ cm2

5. Ifakwe kwicala lefestile: inceda ukukhupha amanzi kunye nokukhupha.