Wamkelekile kwiiwebhusayithi zethu!

Isinxibo, ukuDaya & ukuQiba, iFabric Class yoVavanyo lwezixhobo

  • (eTshayina)YY(B)022E-Imitha yokuqina kwelaphu ezenzekelayo

    (eTshayina)YY(B)022E-Imitha yokuqina kwelaphu ezenzekelayo

    [Ubungakanani besicelo]

    Isetyenziselwa ukumisela ukuqina komqhaphu, uboya, isilika, i-hemp, ifayibha yekhemikhali kunye nezinye iintlobo zelaphu eliphothiweyo, ilaphu elinithiweyo kunye nelaphu elingalukwanga ngokubanzi, ilaphu eligqunyiweyo kunye nezinye izinto ezilukiweyo, kodwa zilungele ukuqina kwephepha, isikhumba, ifilimu kunye nezinye izinto eziguquguqukayo.

    [Imigangatho eyeleleneyo]

    I-GB/T18318.1, ASTM D 1388, IS09073-7, BS EN22313

    【 Iimpawu zesixhobo 】

    I-1.I-infrared photoelectric engabonakaliyo inkqubo yokufumanisa i-incline, endaweni yendabuko ebonakalayo, ukufezekisa ukufumanisa ukungabikho koqhagamshelwano, ukoyisa ingxaki yokuchaneka komlinganiselo ngenxa yesampuli ye-torsion ibanjwe yi-incline;

    2. Isixhobo sokulinganisa i-angle adjustable mechanism, ukulungelelanisa iimfuno zovavanyo ezahlukeneyo;

    3. Stepper motor drive, umlinganiselo ochanekileyo, ukusebenza kakuhle;

    4. Isiboniso sesikrini sokuchukumisa umbala, sinokubonisa ubude bomzekelo wokwandiswa, ubude bokugoba, ukuqina okugoba kunye namaxabiso angasentla omndilili wemeridian, iavareji yobubanzi kunye ne-avareji iyonke;

    5. Umshicileli we-Thermal waseTshayina wokushicilela ingxelo.

    【Iiparamitha zobugcisa】

    1. Indlela yovavanyo: 2

    (Indlela: uvavanyo lwe-latitude kunye nobude, indlela engu-B: uvavanyo oluqinisekileyo kunye nolungalunganga)

    2. I-engile yokulinganisa: 41.5 °, 43 °, 45 ° ezintathu ezilungelelanisiweyo

    3.Ubude obandisiweyo uluhlu: (5-220)mm (iimfuno ezizodwa zinokubekwa phambili xa kuodolwa)

    4. Isisombululo sobude: 0.01mm

    5.Ukuchaneka kokulinganisa: ± 0.1mm

    6. Igeyiji yesampulu yovavanyo:(250×25)mm

    7. Iinkcukacha zeqonga lokusebenza:(250×50)mm

    8. Inkcazo yepleyiti yoxinzelelo lwesampuli:(250×25)mm

    I-9.I-Presing plate propulsion speed: 3mm / s; 4mm/s; 5mm/s

    I-10.Display output: umboniso wesikrini sokuchukumisa

    11.Shicilela ngaphandle: Iingxelo zesiTshayina

    12. Umthamo wokucubungula idatha: inani elipheleleyo lamaqela e-15, iqela ngalinye ≤20 iimvavanyo

    13.Umatshini wokushicilela: umshicileli we-thermal

    14. Umthombo wamandla: AC220V±10% 50Hz

    15. Umthamo omkhulu womatshini: 570mm×360mm×490mm

    16. Ubunzima bomatshini ongundoqo: 20kg

  • (eTshayina) YY(B)512–umvavanyi weepilisi zeTumble-over

    (eTshayina) YY(B)512–umvavanyi weepilisi zeTumble-over

    [Umda] :

    Isetyenziselwa ukuvavanya ukusebenza kwepilling yelaphu phantsi kwe-friction eqengqelekayo kwigubu.

    [Imigangatho efanelekileyo] :

    I-GB/T4802.4 (Iyunithi yoyilo eqhelekileyo)

    ISO12945.3, ASTM D3512, ASTM D1375, DIN 53867, ISO 12945-3, JIS L1076, njl.

    【Iiparamitha zobugcisa】 :

    1. Ubungakanani bebhokisi: 4 PCS

    2. Iimpawu zegubhu: φ 146mm×152mm

    3.Inkcazo yomgca weCork:(452×146×1.5) mm

    4. Iimpawu ze-Impeller: φ 12.7mm×120.6mm

    5. Inkcazo yentsimbi yeplastiki: 10mm×65mm

    6.Isantya:(1-2400)r/min

    7. Uxinzelelo lovavanyo:(14-21)kPa

    8.Umthombo wamandla: AC220V±10% 50Hz 750W

    9. Imilinganiselo :(480×400×680)mm

    10. Ubunzima: 40kg

  • (eTshayina) YY(B)021DX-Umatshini wokomeleza umsonto omnye wombane

    (eTshayina) YY(B)021DX-Umatshini wokomeleza umsonto omnye wombane

    [Ubungakanani besicelo]

    Isetyenziselwa ukuvavanya amandla okuqhawuka kunye nobude bomsonto omnye kunye nomsonto osulungekileyo okanye odityanisiweyo womqhaphu, uboya, i-hemp, isilika, ifayibha yemichiza kunye nomsonto osontiweyo.

     [Imigangatho eyeleleneyo]

    I-GB/T14344 GB/T3916 ISO2062 ASTM D2256

  • (eTshayina) YY(B)021DL-Umatshini wamandla omsonto omnye wombane

    (eTshayina) YY(B)021DL-Umatshini wamandla omsonto omnye wombane

    [Ubungakanani besicelo]

    Isetyenziselwa ukuvavanya amandla okuqhawuka kunye nobude bomsonto omnye kunye nomsonto osulungekileyo okanye odityanisiweyo womqhaphu, uboya, i-hemp, isilika, ifayibha yemichiza kunye nomsonto osontiweyo.

     [Imigangatho eyeleleneyo]

    I-GB/T14344 GB/T3916 ISO2062 ASTM D2256

  • (eChina)YY(B)-611QUV-UV Igumbi lokuguga

    (eChina)YY(B)-611QUV-UV Igumbi lokuguga

    【Ubungakanani besicelo】

    Isibane se-Ultraviolet sisetyenziselwa ukulinganisa umphumo wokukhanya kwelanga, ukufuma kwe-condensation kusetyenziselwa ukulinganisa imvula kunye nombethe, kwaye izinto eziza kulinganiswa zibekwe kwiqondo lokushisa elithile.

    Iqondo lokukhanya kunye nokufuma kuyavavanywa kwimijikelo etshintshanayo.

     

    【Imigangatho efanelekileyo】

    GB/T23987-2009, ISO 11507:2007, GB/T14522-2008, GB/T16422.3-2014, ISO4892-3: 2006, ASTM G154-2006, ASTM G153, GB/T90165-5.

  • (eTshayina)YY(B)743-Isomisi seTumble

    (eTshayina)YY(B)743-Isomisi seTumble

    [Ubungakanani besicelo] :

    Isetyenziselwa ukuwisa ukoma kwelaphu, impahla okanye amanye amalaphu emva kovavanyo lokushwabana.

    [Imigangatho eyeleleneyo] :

    I-GB/T8629, ISO6330, njl

    (Itheyibhile yokomisa i-tumble, i-YY089 iyahambelana)

     

  • (eChina)YY(B)743GT-Tumble dryer

    (eChina)YY(B)743GT-Tumble dryer

    [Umda] :

    Isetyenziselwa ukomisa ilaphu, impahla okanye enye impahla emva kovavanyo lokushwabana.

    [Imigangatho efanelekileyo] :

    I-GB/T8629 ISO6330, njl

    (Ukomiswa komgangatho, YY089 ehambelanayo)

  • (eTshayina) YY(B)802G I-oveni yokulungiswa kweBhaskithi

    (eTshayina) YY(B)802G I-oveni yokulungiswa kweBhaskithi

    [Ubungakanani besicelo]

    Isetyenziselwa ukumisela ukufuma kwakhona kokufuma (okanye isiqulatho sokufuma) semisonto eyahlukeneyo, imisonto kunye namalaphu kunye nokunye ukomiswa kobushushu obungapheliyo.

    [Imigangatho enxulumeneyo] GB/T 9995 ISO 6741.1 ISO 2060, njl.

     

  • (eChina)YY–PBO Lab Padder Uhlobo oluHorizonti

    (eChina)YY–PBO Lab Padder Uhlobo oluHorizonti

    I. Ukusetyenziswa kwemveliso:

    Ilungele ukudaya iisampulu zomqhaphu osulungekileyo, umqhaphu we-T/C wepolyester kunye namanye amalaphu efiber ekhemikhali.

     

    II.Iimpawu zokusebenza

    Lo mzekelo ilitye lokusila encinane yahlulwe nkqo encinane rolling PAO, ethe tyaba encinci yokusila PBO, rolling encinane yokusila zenziwe ngerabha butadiene acid kunye alkali ukumelana, kunye nokumelana umhlwa, elasticity elungileyo, iingenelo ixesha elide inkonzo.

    Uxinzelelo lwe-roll luxhatshazwa ngumoya oxinzelelweyo kwaye lulawulwa yi-valve yokulawula uxinzelelo, onokuxelisa inkqubo yokuvelisa ngokwenene kwaye wenze inkqubo yesampuli ihlangabezane neemfuno zenkqubo yokuvelisa. Ukuphakanyiswa kwe-roll kuqhutywe yi-cylinder, ukusebenza kuguquguqukayo kwaye kuzinzile, kwaye uxinzelelo kumacala omabini lunokugcinwa kakuhle.

    Iqokobhe lalo mzekelo lenziwe ngesibuko sentsimbi engenasici, inkangeleko ecocekileyo, entle, ulwakhiwo olubambeneyo, ixesha elincinci lokuhlala, ukujikeleza ngokujikeleza nge-pedal switch control, ukuze abasebenzi bezandla basebenze lula.

  • (eTshayina)I-YY-PAO Lab Padder Uhlobo oluthe nkqo

    (eTshayina)I-YY-PAO Lab Padder Uhlobo oluthe nkqo

    1. Iintshayelelo ezimfutshane:

    Uxinzelelo lomoya oluthe nkqo umatshini wombane omncinci ulungele ilaphu lokudaya kunye

    ukugqiba unyango, kunye nokujonga umgangatho. Le yimveliso ye-advanced efunxa itekhnoloji

    ukusuka phesheya nasekhaya, kunye digest, ukukhuthaza. Uxinzelelo lwayo lujikeleze i-0.03 ~ 0.6MPa

    (0.3kg/cm2~6kg/cm2)kwaye inokulungelelaniswa, ukuqengqeleka kuhlala kungalungiswa ngokuhambelana

    imfuno yobugcisa. Umphezulu osebenzayo we-roller yi-420mm, ulungele ubungakanani obuncinci bokukhangela ilaphu.

  • (eTshayina) iKhabhinethi yeKhabhinethi yoVavanyo lweMbala yiYY6 yoMthombo wesi-6

    (eTshayina) iKhabhinethi yeKhabhinethi yoVavanyo lweMbala yiYY6 yoMthombo wesi-6

    I.Iinkcazelo

    IKhabhinethi yoVavanyo lweMibala, ilungele onke amashishini kunye nezicelo apho kukho imfuneko yokugcina umbala ungaguquguquki kunye nomgangatho-umz. Izithuthi, iiCeramics, izithambiso, ukutya, izihlangu, ifanitshala, i-knitwear, isikhumba, i-Ophthalmic, ukudaya, ukupakisha, ukuShicilela, ii-inks kunye nombhalo. .

    Kuba umthombo wokukhanya owahlukileyo unamandla ahlukileyo akhazimlayo, xa zifika kumphezulu wenqaku, imibala eyahlukileyo iyabonisa. Ngokubhekiselele kulawulo lombala kwimveliso yemizi-mveliso, xa umhloli ethelekisa ukuhambelana kombala phakathi kweemveliso kunye nemizekelo, kodwa kunokubakho umahluko. phakathi komthombo wokukhanya osetyenziswe apha kunye nomthombo wokukhanya osetyenziswa ngumxhasi.Kwimeko enjalo, umbala phantsi komthombo wokukhanya owahlukileyo uyahluka. Isoloko izisa imiba ilandelayo: Umxhasi wenza isikhalazo ngomahluko wombala nokuba ufuna ukwaliwa kweempahla, eyonakalise kakhulu ikhredithi yenkampani.

    Ukusombulula le ngxaki ingentla, eyona ndlela isebenzayo kukukhangela umbala omhle phantsi komthombo wokukhanya omnye .Umzekelo, uMsebenzi wamazwe ngamazwe usebenzisa i-Artificial Daylight D65 njengomthombo wokukhanya oqhelekileyo wokukhangela umbala wempahla.

    Kubaluleke kakhulu ukusebenzisa umthombo wokukhanya osemgangathweni ukujonga umahluko wombala emsebenzini wasebusuku.

    Ngaphandle komthombo wokukhanya we-D65, iTL84, CWF, UV, kunye neF/A imithombo yokukhanya iyafumaneka kule Khabhinethi yesibane ngesiphumo semetamerism.

     

  • (eTshayina) YY215C uMvavanyi wokufunxwa kwaManzi kwiiNonwovens kunye neetawuli

    (eTshayina) YY215C uMvavanyi wokufunxwa kwaManzi kwiiNonwovens kunye neetawuli

    Ukusetyenziswa kwesixhobo:

    Ukufunxwa kwamanzi kwiitawuli eluswini, izitya kunye nomphezulu wefenitshala kuyenziwa kubomi bokwenyani ukuvavanya.

    ukufunxwa kwayo kwamanzi, olulungele uvavanyo lokufunxa amanzi kwiitawuli, iitawuli zobuso, isikwere

    iitawuli, iitawuli zokuhlambela, iitawuli kunye nezinye iimveliso zetawuli.

    Hlangana nomgangatho:

    I-ASTM D 4772-97 Indlela yoVavanyo oluQhelekileyo lokufunxwa kwaManzi oMphezulu weTawuli (Indlela yoVavanyo oluPhumayo),

    I-GB/T 22799-2009 "Imveliso yetawuli Indlela yokuvavanya ukufunxa amanzi"

123456Okulandelayo >>> Iphepha 1 / 11