Wamkelekile kwiiwebhusayithi zethu!
English
网站焦点图
I-Rubber & Izixhobo zoVavanyo lwePlastiki
Izixhobo zokuvavanya i-Textile
ibhanile
(eTshayina) YYP-50 exhaswa ngokulula kwiMvavanyi yeMpembelelo yeBeam eFakelweyo
  • (eTshayina) YYP-50 exhaswa ngokulula kwiMvavanyi yeMpembelelo yeBeam

(eTshayina) YYP-50 exhaswa ngokulula kwiMvavanyi yeMpembelelo yeBeam

Inkcazelo emfutshane:

Isetyenziselwa ukumisela amandla empembelelo (umqadi oxhaswa ngokulula) wezinto ezingezizo ezentsimbi ezifana neeplastiki eziqinileyo, inayiloni eyomeleziweyo, iplastiki yefiyibha eqinisiweyo, iiseramikhi, ilitye elityhidiweyo, izixhobo zombane zeplastiki, kunye nezinto zokugquma. Inkcazo nganye kunye nemodeli ineentlobo ezimbini: uhlobo lwe-elektroniki kunye nohlobo lokudayela kwesalathisi: umatshini wokuvavanya impembelelo yokudayela isalathisi uneempawu zokuchaneka okuphezulu, ukuzinza okulungileyo kunye noluhlu lokulinganisa okukhulu; Umatshini wokuvavanya impembelelo ye-elektroniki wamkela itekhnoloji yokulinganisa i-engile ye-engile ejikelezayo, ngaphandle kokuba Ukongeza kuzo zonke izibonelelo zohlobo lokudayela kwesalathisi, unokulinganisa ngokwedijithali kwaye ubonise amandla ophukayo, amandla empembelelo, i-angle yokuphakama kwangaphambili, i-angle yokuphakamisa, kunye umyinge wexabiso lebhetshi; inomsebenzi wokulungiswa ngokuzenzekelayo kokulahleka kwamandla, kwaye inokugcina iiseti ezili-10 zolwazi lwedatha yembali. Olu ngcelele koomatshini bokuvavanya lunokusetyenziswa kwiimvavanyo zempembelelo ze-beam ezixhasiweyo kumaziko ophando lwezenzululwazi, iikholeji kunye neeyunivesithi, amaziko okuhlola imveliso kuwo onke amanqanaba, izityalo zokuvelisa izinto, njl.


Iinkcukacha zeMveliso

Iithegi zeMveliso

Umgangatho wesiGqeba:

ISO179, GB/T1043, JB8762kunye neminye imigangatho.

Iiparamitha zobugcisa kunye nezalathi:

1. Isantya sempembelelo (m/s): 2.9 3.8

2. Amandla empembelelo (J): 7.5, 15, 25, (50)

3. I-engile yePendulum: 160°

4. Ireyidi yekona yencakuba yempembelelo: R=2mm±0.5mm

5. Iradiyasi yefayili yomhlathi: R=1mm±0.1mm

6. I-engile ebandakanyiweyo yeblade yempembelelo: 30°±1°

7. Izithuba zemihlathi: 40mm, 60mm, 70mm, 95mm

8. Imowudi yokubonisa: isalathisi sokucofa

9. Uhlobo lovavanyo, ubungakanani, inkxaso yexesha (iyunithi: mm):

Uhlobo loMfanekiso Ubude C Ububanzi b Ukutyeba d span
1 50±1 6±0.2 4±0.2 40
2 80±2 10±0.5 4±0.2 60
3 120±2 15±0.5 10±0.5 70
4 125±2 13±0.5 13±0.5 95

10. Ukunikezelwa kwamandla: AC220V 50Hz

11. Imilinganiselo: 500mm×350mm×800mm (ubude×ububanzi×ukuphakama)

 


  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    Iindidi zeemveliso

    Cofa u-enter ukukhangela okanye i-ESC ukuvala