I-YYT124C -C

Inkcazo emfutshane:

Iinkcukacha zemveliso

Iimpawu zeMveliso

Intshayelelo Intshayelelo

I-filter fitter fibid tibrator ye-tibrator yendawo yokuphefumla yenziwe kwaye yenziwa ngokwemigangatho efanelekileyo. Isetyenziselwa ikakhulu ukuhambisa amandla okuhamba kwamandla okuphinda-phinda into yokutshintsha.

Iiparamitha zobugcisa

Ukusebenza kwamandla: I-220 v, i-50 hz, 50 w

I-Amption Ampling: i-20 mm

Ukuhamba rhoqo: I-100 ± 5 amaxesha / imiz

Ixesha lokuhamba-hamba: 0-99min, ukuhlaliswa, ixesha eliqhelekileyo 20min

Isampulu yovavanyo: ukuya kuthi ga kuma-40 amagama

Ubungakanani bephakeji (l * w * h mm): 700 * 700 * 1150

Iikhrayitheriya zokutshintsha

I-26n149 et al

Iqhotyoshelweyo

I-Console yoLawulo loNcedo loNtengo kunye nomgca omnye wamandla.

Jonga uluhlu lokupakisha kwabanye

Iimpawu zokhuseleko, ukupakisha kunye nezothutho

Ukhuseleko luphawuleka ukhuseleko

ukupakisha

Musa ukubeka kwi-Lawers, ukuphatha ngononophelo, amanzi, ukuya phezulu

ukuthutha

Kwimeko yokuhamba okanye ukupakisha ukugcina, izixhobo kufuneka zikwaziswe kwiiveki ezingaphantsi kwe-15 phantsi kweemeko zokusingqongileyo zilandelayo.

Uluhlu lwamaqondo obushushu afanelekileyo: - 20 ~ 60 ℃.

ISAHLUKO II Ukufakwa kunye nokuyalelwa

1. Iikhrayitheriya zokhuseleko

1.1 Ngaphambi kokufaka, ukulungisa nokugcina izixhobo, iitekhnoloji zokufaka kunye nabasebenzi kufuneka bafundele iNcwadi yeNtsebenzo ngononophelo.

1.2 Ngaphambi kokusebenzisa izixhobo, abaqhubi kufuneka bafumane ngononophelo GB2626 kwaye baqhelene nezibonelelo ezifanelekileyo zomgangatho.

1.3 Izixhobo kufuneka zifakiwe, zigcinwe kwaye zisetyenziswa ngabasebenzi abanoxanduva ngokukhethekileyo ngokwemiyalelo yokusebenza. Ukuba izixhobo zonakaliswa ngenxa yokusebenza okungachanekanga, ayisekho ngaphakathi komda wewaranti.

2. Iimeko zofakelo

Iqondo lobushushu: (21 ± 5) ℃ (ukuba amaqondo obushushu aphezulu kakhulu, aya kukhawulezisa ukwaluphala kwezinto ze-elektroniki yezixhobo, kwaye unciphise isiphumo senkonzo, kwaye sichaphazele isiphumo sovavanyo.)

Umsitho wokusiNgqongileyo: (50 ± 30)

I-3. Ukufakwa

3.1 Ukufakwa koomatshini

Susa ibhokisi yokupakisha yangaphandle, funda ngononophelo incwadana yemiyalelo kwaye ujonge ukuba ngaba izinto zomatshini zigqityiwe kwaye zikwimeko entle ngokwemixholo yoluhlu lokupakisha.

3.2 Ukufakwa kombane

Faka ibhokisi yamandla okanye ukwaphulwa kwesekethe kufutshane nezixhobo.

Ukuqinisekisa ukhuseleko lwabasebenzi kunye nezixhobo, ukubonelela ngamandla kufuneka kube ne-wire ethembekileyo.

Qaphela: ufakelo kunye nonxibelelwano lonikezo lwamandla kufuneka lwenziwe yinjineli yombane oqeqeshiweyo.

Ngaphambili: IYYT42 -i-bimolon engcolisekileyo ye-aerosols paster

Okulandelayo: (China) IYYT139 iyonke iyonke i-tester

Bhala umyalezo apha kwaye uthumele kuthi