English
ibhanile3(1)
ibhena1(1)
ibhena2(1)

Iimveliso

  • I-YYT1 Lebhu Umsi Ihodi(PP)

    I-YYT1 Lebhu Umsi Ihodi(PP)

    Inkcazo yezinto eziphathekayo：

    Ulwakhiwo lokuqhaqha kunye nokuhlanganiswa kwekhabhinethi lusebenzisa isakhiwo sokuqinisa esifakwe umphetho ogobileyo "ofana nomlomo, ofana no-U, ofana no-T", esinesakhiwo esizinzileyo. Sinokuthwala umthwalo ophezulu we-400KG, ongaphezulu kakhulu kunezinye iimveliso zophawu olufanayo, kwaye sinokumelana okuhle kakhulu nee-asidi ezinamandla kunye nee-alkali. Umzimba wekhabhinethi ongezantsi wenziwe ngokuhlanganisa iipleyiti ze-polypropylene ze-PP ezinobukhulu obuyi-8mm, ezinokumelana okukhulu nee-asidi, ii-alkali kunye nokugqwala. Zonke iiphaneli zeminyango zamkela isakhiwo somphetho ogobileyo, esiqinileyo nesiqinileyo, esingelulanga ukusonakalisa, kwaye inkangeleko iyonke inobuhle kwaye iyapha.

     

     

    uphandoiinkcukacha
  • Igumbi lobushushu kunye nokufuma le-YYP-100 (100L)

    Igumbi lobushushu kunye nokufuma le-YYP-100 (100L)

    1)Ukusetyenziswa kwezixhobo:

    Le mveliso ivavanywa kubushushu obuphezulu kunye nokufuma okuphezulu, kubushushu obuphantsi kunye nokufuma okuphantsi, okufanelekileyo kuvavanyo lolawulo lomgangatho wezinto ze-elektroniki, izixhobo zombane, iibhetri, iiplastiki, ukutya, iimveliso zephepha, izithuthi, isinyithi, iikhemikhali, izixhobo zokwakha, amaziko ophando, iOfisi yohlolo kunye nokuvalelwa kwabantu, iiyunivesithi kunye nezinye iiyunithi zoshishino.

     

                        

    2) Ukuhlangabezana nomgangatho:

    1. Izalathisi zokusebenza ziyahlangabezana neemfuno ze-GB5170, 2, 3, 5, 6-95 “Ukuqinisekiswa kweparameter esisiseko Indlela yovavanyo lokusingqongileyo Izixhobo zeemveliso zombane neze-elektroniki Ubushushu obuphantsi, ubushushu obuphezulu, ubushushu obuhlala bufumile, izixhobo zovavanyo lobushushu obufumileyo ezitshintshanayo”

    2. Iinkqubo ezisisiseko zovavanyo lokusingqongileyo kwiimveliso zombane neze-elektroniki Uvavanyo A: Indlela yovavanyo lobushushu obuphantsi GB 2423.1-89 (IEC68-2-1)

    3. Iinkqubo ezisisiseko zovavanyo lokusingqongileyo kwiimveliso zombane neze-elektroniki Uvavanyo B: indlela yovavanyo lobushushu obuphezulu GB 2423.2-89 (IEC68-2-2)

    4. Iinkqubo ezisisiseko zovavanyo lokusingqongileyo kwiimveliso zombane neze-elektroniki Uvavanyo lweCa: Indlela yovavanyo lobushushu obumanzi obuhlala buhleli GB/T 2423.3-93 (IEC68-2-3)

    5. Iinkqubo ezisisiseko zovavanyo lokusingqongileyo kwiimveliso zombane neze-elektroniki Uvavanyo lweDa: Indlela yovavanyo lokutshintsha ukufuma kunye nobushushu GB/T423.4-93(IEC68-2-30)

    uphandoiinkcukacha
  • Umatshini wokucoca ityhubhu yovavanyo oluzenzekelayo lwe-YY-40

    Umatshini wokucoca ityhubhu yovavanyo oluzenzekelayo lwe-YY-40

    • Intshayelelo emfutshane

    Ngenxa yokwahluka kweenqanawa zelebhu, ingakumbi isakhiwo esibhityileyo nesinde seetyhubhu ezinkulu zokuvavanya, kuzisa ubunzima obuthile kumsebenzi wokucoca. Umatshini wokucoca iityhubhu zokuvavanya ozenzekelayo owenziwe yinkampani yethu unokucoca ngokuzenzekelayo kwaye womise ngaphakathi nangaphandle kweetyhubhu zokuvavanya kuzo zonke iinkalo. Ufanelekile ngokukodwa ekucoceni iityhubhu zokuvavanya kwi-Kjeldahl nitrogen determinators.

     

    • Iimpawu zeMveliso

    1) I-304 stainless steel vertical pipe spray, ukuhamba kwamanzi ngoxinzelelo oluphezulu kunye nokucoca i-pulse enkulu kunokuqinisekisa ucoceko lokucoca.

    2) Inkqubo yokomisa umoya eshushu enoxinzelelo oluphezulu kunye nomoya omkhulu ingawugqiba ngokukhawuleza umsebenzi wokomisa, ngobushushu obuphezulu obuyi-80℃.

    3) Ukongezwa ngokuzenzekelayo kolwelo lokucoca.

    4) Itanki yamanzi eyakhelwe ngaphakathi, ukuzalisa amanzi ngokuzenzekelayo kunye nokuma ngokuzenzekelayo.

    5) Ukucoca okuqhelekileyo: ① Isifutho samanzi esicacileyo → ② Isifutho se-agent yokucoca esitshiziweyo → ③ Nciphisa → ④ Hlamba ngamanzi acocekileyo → ⑤ Ukomisa umoya oshushu ngoxinzelelo oluphezulu.

    6) Ukucoca nzulu: ① Cima isitshizi samanzi → ② Cima isitshizi se-agent yokucoca → ③ Nciphisa → ④ Cima amanzi okuhlamba → ⑤ Cima isitshizi se-agent yokucoca → ⑥ Nciphisa → ⑦ Cima amanzi okuhlamba → ⑧ Ukomisa umoya oshushu ngoxinzelelo oluphezulu.

    uphandoiinkcukacha
  • Uhlobo lweqhosha lovavanyo lwamandla oluzenzekelayo lwe-YY109

    Uhlobo lweqhosha lovavanyo lwamandla oluzenzekelayo lwe-YY109

    1.BingxwabangxwabaIintshayelelo

    1.1 Ukusetyenziswa

    Lo matshini ufanelekile kwiimviwo zephepha, zekhadibhodi, zelaphu, zesikhumba kunye nezinye iindlela zokuvavanya amandla okuxhathisa iintanda.

    1.2 Umgaqo

    Lo matshini usebenzisa uxinzelelo lokudlulisa isignali, kwaye ugcina ngokuzenzekelayo ixabiso eliphezulu lamandla okuqhekeka xa isampuli iqhekeka. Beka isampuli kwi-mold yerabha, ubambe isampuli ngoxinzelelo lomoya, uze ufake uxinzelelo kwi-motor ngokulinganayo, ukuze isampuli inyuke kunye nefilimu ide isampuli iqhekeke, kwaye ixabiso eliphezulu le-hydraulic lixabiso lamandla okuqhekeka kwesampuli.

     

    2.Umgangatho weNtlanganiso:

    Ikhadibhodi ye-ISO 2759- -Ukuzimisela kokumelana nokuqhekeka

    I-GB / T 1539 Ukuzimisela kokumelana kwebhodi yeBhodi

    QB / T 1057 Ukuzimisela kokumelana nokuqhekeka kwePhepha kunye neBhodi

    I-GB / T 6545 Ukuzimisela kwamandla okuxhathisa ukuqhekeka kweCorrugated Break

    I-GB / T 454 Ukuzimisela kokumelana nokuqhekeka kwephepha

    Iphepha le-ISO 2758 - Ukuqinisekiswa kokumelana nokuqhekeka

    uphandoiinkcukacha
  • Isivavanyeli sokuCrush ityhubhu yephepha ye-YYP113E (Uqoqosho)

    Isivavanyeli sokuCrush ityhubhu yephepha ye-YYP113E (Uqoqosho)

    Intshayelelo yezixhobo:

    Ifanelekile kwiityhubhu zephepha ezinobubanzi obungaphandle obuyi-200mm okanye ngaphantsi, okwaziwa ngokuba ngumatshini wokuvavanya ukumelana noxinzelelo lwetyhubhu yephepha okanye umatshini wokuvavanya uxinzelelo lwetyhubhu yephepha. Sisixhobo esisisiseko sokuvavanya ukusebenza koxinzelelo lweetyhubhu zephepha. Isebenzisa izinzwa ezichanekileyo kakhulu kunye neetships zokucubungula ngesantya esiphezulu ukuqinisekisa ukuchaneka kwesampulu.

     

    IzixhoboIimbonakalo:

    Emva kokuba uvavanyo lugqityiwe, kukho umsebenzi wokubuyisela ngokuzenzekelayo, onokumisela ngokuzenzekelayo amandla okutyumza kwaye ugcine idatha yovavanyo ngokuzenzekelayo.

    2. Isantya esihlengahlengiswayo, ujongano olupheleleyo lokusebenza kwesibonisi se-LCD saseTshayina, iiyunithi ezininzi ezikhoyo zokukhetha;

    3. Ixhotyiswe ngeprinta encinci, enokuprinta ngqo iziphumo zovavanyo.

    uphandoiinkcukacha
  • Isihlalutyi seFiber yeYY-06

    Isihlalutyi seFiber yeYY-06

    Intshayelelo yezixhobo:

    I-automatic fiber analyzer sisixhobo esimisela umxholo we-crude fiber kwisampuli ngokuyinyibilikisa ngeendlela ezisetyenziswa rhoqo zokugaya i-asidi kunye ne-alkali, size emva koko silinganise ubunzima bayo. Isebenza ekumiselweni komxholo we-crude fiber kwiinkozo ezahlukeneyo, ukutya, njl.njl. Iziphumo zovavanyo ziyahambelana nemigangatho yesizwe. Izinto ezifunekayo kukumisela ziquka ukutya, iinkozo, iinkozo, ukutya kunye nezinye iimveliso zezolimo nezecala ezifuna ukuba umxholo we-crude fiber umiselwe.

    Le mveliso ingabizi kakhulu, inesakhiwo esilula, kulula ukuyisebenzisa kunye nokusebenza okubiza kakhulu.

    uphandoiinkcukacha
  • Umatshini wokuHlanganisa i-Vacuum we-YY-JA50 (3L)

    Umatshini wokuHlanganisa i-Vacuum we-YY-JA50 (3L)

    Intshayelelo:

    Umatshini wokuSusa iVacuum we-YY-JA50 (3L) uphuhlisiwe kwaye uqaliswa ngokusekelwe kumgaqo wokuxusa iiplanethi. Le mveliso iphucule kakhulu iteknoloji yangoku kwiinkqubo zokuvelisa i-LED. Umqhubi kunye nomlawuli zenziwe kusetyenziswa iteknoloji ye-microcomputer. Le ncwadana inika abasebenzisi indlela yokusebenza, yokugcina, kunye neendlela zokusebenzisa ezichanekileyo.

    uphandoiinkcukacha
  • Umatshini wovavanyo lweMpembelelo yeBhola yokuwa yeYYP 136

    Umatshini wovavanyo lweMpembelelo yeBhola yokuwa yeYYP 136

    ImvelisoIntshayelelo:

    Umatshini wokuvavanya impembelelo yebhola ewelayo sisixhobo esisetyenziselwa ukuvavanya amandla ezinto ezifana neeplastiki, iiseramikhi, i-acrylic, iifayibha zeglasi, kunye neengubo. Esi sixhobo sihambelana nemigangatho yovavanyo ye-JIS-K6745 kunye ne-A5430.

    Lo matshini ulungisa iibhola zentsimbi ezinobunzima obuthile zibe kubude obuthile, nto leyo evumela ukuba ziwe ngokukhululekileyo kwaye zibethe iisampulu zovavanyo. Umgangatho weemveliso zovavanyo ujongwa ngokusekelwe kwinqanaba lomonakalo. Ezi zixhobo zinconywa kakhulu ngabavelisi abaninzi kwaye sisixhobo sovavanyo esifanelekileyo.

    uphandoiinkcukacha
  • Isivavanyeli seNqanaba lokuThunyelwa komphunga wamanzi seYY-RC6 (ASTM E96) WVTR

    Isivavanyeli seNqanaba lokuThunyelwa komphunga wamanzi seYY-RC6 (ASTM E96) WVTR

    I. Intshayelelo yeMveliso:

    Umvavanyi wezinga lokudluliselwa komphunga wamanzi we-YY-RC6 yinkqubo yovavanyo oluphezulu lwe-WVTR yobungcali, esebenzayo nekrelekrele, efanelekileyo kwiinkalo ezahlukeneyo ezifana neefilimu zeplastiki, iifilimu ezidityanisiweyo, unyango kunye nolwakhiwo.

    Ukumisela izinga lokudluliswa komphunga wamanzi kwezinto. Ngokulinganisa izinga lokudluliswa komphunga wamanzi, izalathisi zobugcisa zeemveliso ezifana nezixhobo zokupakisha ezingaguqukiyo zinokulawulwa.

    II.Izicelo zeMveliso

     

     

     

     

    Isicelo esiSiseko

    Ifilimu yeplastiki

    Uvavanyo lwezinga lokusasazeka komphunga wamanzi kwiifilimu ezahlukeneyo zeplastiki, iifilimu zeplastiki ezidityanisiweyo, iifilimu ezidityanisiweyo zephepha-plastiki, iifilimu ezidityanisiweyo, iifilimu ezigqunywe nge-aluminium, iifilimu ezidityanisiweyo zefoyile ye-aluminium, iifilimu ezidityanisiweyo zefoyile ye-aluminium yeglasi kunye nezinye izinto ezifana nefilimu.

    Iphepha leplastikhi

    Uvavanyo lwezinga lokusasazeka komphunga wamanzi kwizinto ezikwiphepha ezifana namaphepha e-PP, amaphepha e-PVC, amaphepha e-PVDC, iifoyile zesinyithi, iifilimu, kunye nee-wafer ze-silicon.

    Iphepha, ikhabhoni

    Uvavanyo lwezinga lokusasazeka komphunga wamanzi kwizixhobo zephepha ezidityanisiweyo ezifana nephepha eligqunywe nge-aluminium kwiipakethi zecuba, iphepha-i-aluminium-iplastiki (iTetra Pak), kunye nephepha kunye nekhadibhodi.

    Ulusu olungeyolwemvelo

    Ulusu olungeyolwemvelo lufuna inqanaba elithile lokungena kwamanzi ukuqinisekisa ukusebenza kakuhle kokuphefumla emva kokuba lufakwe ebantwini okanye kwizilwanyana. Le nkqubo ingasetyenziselwa ukuvavanya ukungena komswakama kolusu olungeyolwemvelo.

    Izixhobo zonyango kunye nezixhobo ezincedisayo

    Isetyenziselwa uvavanyo lokudluliselwa komphunga wamanzi wezixhobo zonyango kunye nezinto ezincedisayo, njengovavanyo lokudluliselwa komphunga wamanzi wezinto ezifana neepatches zeplasta, iifilimu zokhathalelo lwamanxeba angenazintsholongwane, iimaski zobuhle, kunye neepatches zamanxeba.

    Amalaphu, amalaphu angalukwanga

    Uvavanyo lwezinga lokusasazeka komphunga wamanzi kwimpahla, amalaphu angalukwanga kunye nezinye izinto, ezifana namalaphu angangeni manzi naphefumlayo, izinto zelaphu ezingalukwanga, amalaphu angalukwanga eemveliso zococeko, njl.njl.

     

     

     

     

     

    Isicelo esongeziweyo

    Iphepha elingasemva lelanga

    Uvavanyo lwezinga lokusasazeka komphunga wamanzi olusebenza kwiishiti zangasemva zelanga.

    Ifilimu yokubonisa ikristale yolwelo

    Isebenza kuvavanyo lwezinga lokudluliswa komphunga wamanzi kwiifilimu zokubonisa ikristale yolwelo

    Ifilimu yokupeyinta

    Isebenza kuvavanyo lokumelana namanzi kwiifilimu ezahlukeneyo zepeyinti.

    Izithambiso

    Isebenza kuvavanyo lokusebenza kokuthambisa izithambiso.

    Inwebu ebolayo

    Isebenza kuvavanyo lokumelana namanzi kwiifilimu ezahlukeneyo ezinokubola, ezifana neefilimu zokupakisha ezisekelwe kwisitatshi, njl.

     

    III.Iimpawu zemveliso

    1. Ngokusekelwe kumgaqo wovavanyo lwendlela yekomityi, yinkqubo yovavanyo lwesantya sokudluliselwa komphunga wamanzi (i-WVTR) esetyenziswa kakhulu kwiisampulu zefilimu, ekwaziyo ukubona ukudluliselwa komphunga wamanzi okuphantsi njenge-0.01g/m2 · 24h. Iseli yomthwalo enesisombululo esiphezulu elungiselelweyo inika uvakalelo oluhle kakhulu lwenkqubo ngelixa iqinisekisa ukuchaneka okuphezulu.

    2. Ulawulo lobushushu kunye nokufuma olusebenza ngeendlela ezahlukeneyo, oluchanekileyo, noluzenzekelayo lwenza kube lula ukufezekisa uvavanyo olungaqhelekanga.

    3. Isantya somoya esiqhelekileyo sokucoca siqinisekisa umahluko oqhubekayo wokufuma phakathi kwangaphakathi nangaphandle kwekomityi ekwaziyo ukungena kumswakama.

    4. Inkqubo iphinda ibuyele kwi-zero ngokuzenzekelayo ngaphambi kokuba ilinganise ukuqinisekisa ukuchaneka kokulinganisa ngakunye.

    5. Le nkqubo isebenzisa uyilo lwe-cylinder lifting mechanical junction kunye nendlela yokulinganisa ubunzima obungacwangciswanga, nto leyo enciphisa ngempumelelo iimpazamo zenkqubo.

    6. Izikhonkwane zokuqinisekisa ubushushu kunye nokufuma ezinokuqhagamshelwa ngokukhawuleza zenza kube lula kubasebenzisi ukwenza uhlengahlengiso olukhawulezileyo.

    7. Iindlela ezimbini zokulinganisa ngokukhawuleza, ifilimu esemgangathweni kunye nobunzima obuqhelekileyo, zibonelelwe ukuqinisekisa ukuchaneka kunye nokufikeleleka kwedatha yovavanyo.

    8. Zonke iikomityi ezintathu ezikwaziyo ukufunxa umswakama zingenza uvavanyo oluzimeleyo. Iinkqubo zovavanyo aziphazamisani, kwaye iziphumo zovavanyo ziboniswa ngokwazo.

    9. Ikomityi nganye kwezi zintathu zikwaziyo ukufunxa umswakama ingenza uvavanyo oluzimeleyo. Iinkqubo zovavanyo aziphazamisani, kwaye iziphumo zovavanyo ziboniswa ngokwazo.

    10. Isikrini esikhulu sokuchukumisa sinika imisebenzi ekulula ukuyisebenzisa kunye noomatshini, okwenza kube lula ukusebenza komsebenzisi kunye nokufunda ngokukhawuleza.

    11. Xhasa ukugcinwa kwedatha yovavanyo olunefomathi ezininzi ukuze kube lula ukungenisa nokuthumela idatha ngaphandle;

    12. Xhasa imisebenzi emininzi efana nombuzo wedatha yembali olula, ukuthelekisa, uhlalutyo kunye nokuprinta;

     

    uphandoiinkcukacha
  • Umatshini wovavanyo lwe-elektroniki we-YYP-50KN (UTM)

    Umatshini wovavanyo lwe-elektroniki we-YYP-50KN (UTM)

    1. Isishwankathelo

    Umatshini wokuvavanya ukuxinana kwendandatho ye-50KN sisixhobo sokulinganisa izinto esinobuchwepheshe obuphambili basekhaya. Ufanelekile kwiimvavanyo zepropathi ezibonakalayo ezifana nokuxinana, ukucinezela, ukugoba, ukucheba, ukukrazula nokuxobula iintsimbi, izinto ezingezizo iintsimbi, izixhobo ezidityanisiweyo kunye neemveliso. Isoftware yokulawula uvavanyo isebenzisa iqonga lenkqubo yokusebenza yeWindows 10, equlathe ujongano lwesoftware olusekelwe kwimizobo kunye nomfanekiso, iindlela zokucubungula idatha eziguquguqukayo, iindlela zokucwangcisa ulwimi lwe-VB ezimiselweyo, kunye nemisebenzi yokukhusela umda okhuselekileyo. Ikwanayo nemisebenzi yokuvelisa ngokuzenzekelayo ii-algorithms kunye nokuhlela ngokuzenzekelayo iingxelo zovavanyo, ezenza kube lula kwaye ziphucule kakhulu amandla okulungisa iimpazamo kunye nophuhliso lwenkqubo. Inokubala iiparameter ezifana namandla okuvelisa, i-elastic modulus, kunye namandla okuxobula aphakathi. Isebenzisa izixhobo zokulinganisa ezichanekileyo kwaye idibanisa i-automation ephezulu kunye nobukrelekrele. Ulwakhiwo lwayo lutsha, iteknoloji iphucukile, kwaye ukusebenza kuzinzile. Ilula, iguquguqukayo kwaye kulula ukuyigcina isebenza. Ingasetyenziswa ngamasebe ophando lwesayensi, iikholeji kunye neeyunivesithi, kunye namashishini emizi-mveliso kunye nemigodi uhlalutyo lwepropathi yoomatshini kunye nokuhlolwa komgangatho wemveliso wezixhobo ezahlukeneyo.

     

     

     

    2. Eyona iphambili Ezobugcisa Iiparameter:

    2.1 Umlinganiselo wamandla Umthwalo ophezulu: 50kN

    Ukuchaneka: ±1.0% yexabiso elibonisiweyo

    2.2 Ukuguqulwa (I-Photoelectric Encoder) Umgama ophezulu wokuxinana: 900mm

    Ukuchaneka: ± 0.5%

    2.3 Umlinganiselo Wokufuduka Ukuchaneka: ±1%

    2.4 Isantya: 0.1 - 500mm/min

     

     

     

     

    2.5 Umsebenzi wokuPrinta: Amandla aphezulu okuPrinta, ukunwebeka, incopho yokukhupha, ukuqina kweringi kunye nee-curves ezihambelanayo, njl. (Iiparameter ezongezelelweyo zokuprinta zingongezwa ngokweemfuno zomsebenzisi).

    2.6 Umsebenzi woNxibelelwano: Ukunxibelelana nesoftware yokulawula umlinganiselo wekhompyutha ephezulu, kunye nomsebenzi wokukhangela izibuko ze-serial ozenzekelayo kunye nokucubungula idatha yovavanyo ngokuzenzekelayo.

    2.7 Izinga lokuSampula: 50 amaxesha/imizuzwana

    Ubonelelo lwaMandla oluyi-2.8: AC220V ± 5%, 50Hz

    2.9 Ubukhulu beMainframe: 700mm × 550mm × 1800mm 3.0 Ubunzima beMainframe: 400kg

    uphandoiinkcukacha
  • I-YY-KND200 I-Automatic Kjeldahl Nitrogen Analyzer

    I-YY-KND200 I-Automatic Kjeldahl Nitrogen Analyzer

    1. Intshayelelo yeMveliso:

    Indlela yeKjeldahl yindlela yakudala yokumisela initrogen. Indlela yeKjeldahl isetyenziswa kakhulu ukumisela iikhompawundi zenitrogen emhlabeni, ekutyeni, ekufuyeni izilwanyana, kwiimveliso zezolimo, ekutyeni nakwezinye izinto. Ukumisela isampuli ngendlela yeKjeldahl kufuna iinkqubo ezintathu: ukugaya isampuli, ukwahlulwa kwe-distillation kunye nohlalutyo lwe-titration.

     

    I-YY-KDN200 automatic Kjeldahl nitrogen analyzer isekelwe kwindlela yokuchonga i-nitrogen yeKjeldahl yakudala eyenziweyo, isampuli yokuhluza ngokuzenzekelayo, ukwahlulwahlulwa ngokuzenzekelayo kunye nohlalutyo lwe-"nitrogen element" (iproteni) ngokusebenzisa inkqubo yohlalutyo lwetekhnoloji enxulumeneyo yangaphandle, indlela yayo, ukuveliswa ngokuhambelana nemigangatho yokuvelisa ye-"GB/T 33862-2017 epheleleyo (isiqingatha) ye-Kjeldahl nitrogen analyzer" kunye nemigangatho yamazwe ngamazwe.

    uphandoiinkcukacha
  • Isivavanyeli seNtambo yokukhanya ye-YY-ZR101

    Isivavanyeli seNtambo yokukhanya ye-YY-ZR101

    I. Igama lezixhobo:Isivavanyi seNtambo ekhazimlayo

     

    II. Imodeli yezixhobo: YY-ZR101

     

    III.Intshayelelo yezixhobo:

    Iukukhanya Umvavanyi wentambo uza kufudumeza izinto ezichaziweyo (Ni80/Cr20) kunye nemo yentambo yokufudumeza yombane (intambo ye-nickel-chromium ye-Φ4mm) enombane ophezulu ukuya kubushushu bovavanyo (550℃ ~ 960℃) umzuzu o-1, aze emva koko ayitshise ngokuthe nkqo imveliso yovavanyo kangangemizuzwana engama-30 kuxinzelelo oluchaziweyo (1.0N). Misela umngcipheko womlilo weemveliso zezixhobo zombane neze-elektroniki ngokuxhomekeke ekubeni iimveliso zovavanyo kunye neebhedi ziyavutha okanye zigcinwe ixesha elide na; Misela ubushushu bokutsha, ukutsha (GWIT), isalathisi sokutsha kunye nokutsha (GWFI) kwezinto eziqinileyo zokukhusela kunye nezinye izinto eziqinileyo ezinokutsha. Umvavanyi wentambo yokutsha ufanelekile kumacandelo ophando, imveliso kunye nokuhlolwa komgangatho wezixhobo zokukhanyisa, izixhobo zombane ezine-voltage ephantsi, izixhobo zombane, kunye nezinye iimveliso zombane neze-elektroniki kunye nezinto zazo.

     

    IV. Iiparameter zobugcisa:

    1. Ubushushu bentambo eshushu: 500 ~ 1000℃ ehlengahlengiswayo

    2. Ukunyamezelana kobushushu: 500 ~ 750℃ ±10℃, > 750 ~ 1000℃ ±15℃

    3. Ukuchaneka kwesixhobo sokulinganisa ubushushu ± 0.5

    4. Ixesha lokutshisa: imizuzu eyi-0-99 kunye nemizuzwana engama-99 elungisekayo (ngokuvamile ikhethwa njengemizuzwana engama-30)

    5. Ixesha lokutshisa: imizuzu eyi-0-99 kunye nemizuzwana engama-99, ikhefu ngesandla

    6. Ixesha lokucima: imizuzu eyi-0-99 kunye nemizuzwana engama-99, ikhefu ngesandla

    Isixhenxe. I-Thermocouple: Φ0.5/Φ1.0mm I-thermocouple enezixhobo zokuzikhusela yohlobo lwe-K (ayiqinisekiswanga)

    8. Ucingo olukhanyayo: Ucingo lwe-nickel-chromium lwe-Φ4 mm

    9. Intambo eshushu ifaka uxinzelelo kwisampulu: 0.8-1.2N

    10. Ubunzulu bokunyathela: 7mm±0.5mm

    11. Umgangatho wesalathiso: GB/T5169.10, GB4706.1, IEC60695, UL746A

    Umthamo weStudio ezilishumi elinambini: 0.5m3

    13. Ubukhulu bangaphandle: 1000mm ububanzi x 650mm ubunzulu x 1300mm ukuphakama.

    6

    uphandoiinkcukacha
  • Isivavanyeli se-Oxygen Index ye-YY-JF3

    Isivavanyeli se-Oxygen Index ye-YY-JF3

    I.Ububanzi besicelo:

    Isebenza kwiiplastiki, irabha, ifayibha, ifoam, ifilimu kunye nezinto zelaphu ezifana nokulinganisa ukusebenza kokutsha

     II. Iiparameter zobugcisa:                                   

    1. I-sensor ye-oksijini engenisiweyo, uxinaniso lwe-oksijini yokubonisa yedijithali ngaphandle kokubalwa, ukuchaneka okuphezulu kunye nokuchaneka ngakumbi, uluhlu luphakathi kwe-0-100%

    2. Isisombululo sedijithali: ± 0.1%

    3. Ukuchaneka kokulinganisa komatshini wonke: 0.4

    4. Uluhlu lolawulo lokuhamba kwamanzi: 0-10L/min (60-600L/h)

    5. Ixesha lokuphendula: < 5S

    6. Isilinda yeglasi yeQuartz: Ububanzi bangaphakathi ≥75㎜ obuphezulu yi-480mm

    7. Izinga lokuhamba kwegesi kwisilinda yokutsha: 40mm±2mm/s

    8. Imitha yokuhamba: 1-15L/min (60-900L/H) iyalungiseka, ukuchaneka 2.5

    9. Indawo yovavanyo: Ubushushu obuphakathi: ubushushu begumbi ~ 40℃; Umswakama ohambelanayo: ≤70%;

    10. Uxinzelelo lokufaka: 0.2-0.3MPa (qaphela ukuba olu xinzelelo alunakudlula)

    11. Uxinzelelo olusebenzayo: I-nitrogen 0.05-0.15Mpa I-oxygen 0.05-0.15Mpa I-oxygen/nitrogen mixed gas inlet: kubandakanya i-pressure regulator, i-flow regulator, i-gas filter kunye ne-mixing chamber.

    12. Iikliphu zesampulu zingasetyenziselwa iiplastiki ezithambileyo neziqinileyo, amalaphu, iingcango zomlilo, njl.njl.

    13. Inkqubo yokutsha yepropane (butane), ubude belangatye obuyi-5mm-60mm bunokulungiswa ngokukhululekileyo

    14. Igesi: i-nitrogen yemizi-mveliso, ioksijini, ubumsulwa > 99%; (Qaphela: Umthombo womoya kunye nentloko yekhonkco yesixhobo somsebenzisi).

    Iingcebiso: Xa uvavanyo lwe-oxygen index, kuyimfuneko ukusebenzisa ubuncinane i-98% ye-oxygen/nitrogen yomgangatho wezoshishino ibhotile nganye njengomthombo womoya, kuba igesi engentla yimveliso yokuthutha enobungozi obukhulu, ayinakubonelelwa njengezixhobo zovavanyo lwe-oxygen index, inokuthengwa kuphela kwisikhululo sepetroli sendawo yomsebenzisi. (Ukuze kuqinisekiswe ubunyulu begesi, nceda uthenge kwisikhululo sepetroli sendawo esiqhelekileyo)

    15.Iimfuno zamandla: AC220 (+10%) V, 50HZ

    16. Amandla aphezulu: 50W

    17. Isitshisi: kukho umlomo owenziwe ngetyhubhu yesinyithi enobubanzi bangaphakathi be-Φ2±1mm ekupheleni, onokufakwa kwisilinda yokutsha ukuze uvuthe isampuli, ubude belilangatye: 16±4mm, ubungakanani buyalungiseka

    18Ikliphu yesampulu yezinto ezizixhasayo: inokuxhonywa kwindawo yeshaft yesilinda yokutsha kwaye ingabamba isampuli ngokuthe nkqo

    19. Ukhetho: Isibambi sesampulu sezinto ezingazixhasi: singalungisa amacala amabini athe nkqo esampulu kwisakhelo ngaxeshanye (sifanelekile kwifilimu yelaphu nezinye izinto)

    20.Isiseko sesilinda yokutsha singaphuculwa ukuqinisekisa ukuba ubushushu begesi exutyiweyo bugcinwa kwi-23℃ ~ 2℃

    III. Ulwakhiwo lweChassis:                                

    1. Ibhokisi yokulawula: Isixhobo somatshini we-CNC sisetyenziselwa ukucubungula nokwenza, umbane ongashukumiyo webhokisi yokutshiza yentsimbi uyatshizwa, kwaye inxalenye yokulawula ilawulwa ngokwahlukileyo kwinxalenye yovavanyo.

    2. Isilinda yokutsha: ityhubhu yeglasi ye-quartz esemgangathweni ophezulu enganyangekiyo kubushushu obuphezulu (ububanzi bangaphakathi ￠75mm, ubude 480mm) Ububanzi beplagi: φ40mm

    3. Isampulu: isampulu esizixhasayo, kwaye singabamba isampulu ngokuthe nkqo; (Isakhelo sesitayile esingazixhasiyo esizikhethayo), iiseti ezimbini zeekliphu zesitayile ukuhlangabezana neemfuno ezahlukeneyo zovavanyo; Uhlobo lwe-pattern clip splice, kulula ukubeka ipatheni kunye ne-pattern clip

    4. Ububanzi bomngxuma wetyhubhu ekupheleni kwesixhobo sokukhanyisa intonga ende yi-￠2±1mm, kwaye ubude belangatye lesixhobo sokukhanyisa yi-(5-50) mm

     

    IV. Ukuhlangabezana nomgangatho:                                     

    Umgangatho woyilo:

    GB/T 2406.2-2009

     

    Hlangana nomgangatho:

    I-ASTM D 2863, ISO 4589-2, NES 714; GB/T 5454;GB/T 10707-2008;  GB/T 8924-2005; GB/T 16581-1996;QAPHELA/SH/T 0815-2010;I-TB/T 2919-1998; I-IEC 61144-1992 ISO 15705-2002;  I-ISO 4589-2-1996;

     

    Qaphela: Inzwa yeoksijini

    1. Ukwaziswa kwe-oxygen sensor: Kuvavanyo lwe-oxygen index, umsebenzi we-oxygen sensor kukuguqula i-chemical signal of combustion ibe yi-electronic signal eboniswe phambi komqhubi. I-sensor ilingana nebhetri, esetyenziswa kube kanye kuvavanyo ngalunye, kwaye okukhona i-frequency yomsebenzisi esetyenziswa rhoqo okanye ixabiso le-oxygen index yezinto zovavanyo liphezulu, kokukhona i-oxygen sensor iya kuba nokusetyenziswa okuphezulu.

    2. Ukugcinwa kwe-sensor ye-oksijini: Ngaphandle kokulahleka okuqhelekileyo, la manqaku mabini alandelayo ekugcinweni nasekugcinweni anceda ukwandisa ubomi benkonzo ye-sensor ye-oksijini:

    1)Ukuba izixhobo azidingi kuvavanywa ixesha elide, isenzi se-oksijini singasuswa kwaye indawo yokugcina i-oksijini ingahlukaniswa ngeendlela ezithile kubushushu obuphantsi. Indlela elula yokusebenza ingakhuseleka ngokufanelekileyo ngeplastiki yokusonga ize ibekwe kwifriji efrijini.

    2)Ukuba izixhobo zisetyenziswa rhoqo (njengexesha lomjikelo wenkonzo leentsuku ezintathu okanye ezine), ekupheleni kosuku lovavanyo, isilinda yeoksijini ingacinywa umzuzu omnye okanye emibini ngaphambi kokuba isilinda ye-nitrogen icinywe, ukuze i-nitrogen izaliswe kwezinye izixhobo zokuxuba ukunciphisa impendulo engasebenziyo yesivamvo seoksijini kunye noqhagamshelwano lweoksijini.

    Itheyibhile yemeko yofakelo: Ilungiselelwe ngabasebenzisi

    Imfuneko yendawo

    Ubungakanani obupheleleyo

    I-L62*W57*H43cm

    Ubunzima (KG)

    30

    Ibhentshi yoVavanyo

    Ibhentshi yokusebenzela ingabi ngaphantsi kwe-1 m ubude kwaye ingabi ngaphantsi kwe-0.75 m ububanzi

    Imfuneko yamandla

    I-Voltage

    220V ± 10% 、50HZ

    Amandla

    100W

    Amanzi

    No

    Ubonelelo ngegesi

    Igesi: i-nitrogen yemizi-mveliso, ioksijini, ubumsulwa > 99%; Ivalvu yokunciphisa uxinzelelo lwetafile ephindwe kabini ehambelanayo (ingalungiswa nge-0.2 mpa)

    Inkcazo yongcoliseko

    umsi

    Imfuneko yokungenisa umoya

    Esi sixhobo masibekwe kwindawo yokukhupha umoya okanye siqhagamshelwe kwinkqubo yokucoca nokucoca igesi yolwelo

    Ezinye iimfuno zovavanyo
    uphandoiinkcukacha
  • Uvavanyo lwe-YY-JF5 Automatic Oxygen Index

    Uvavanyo lwe-YY-JF5 Automatic Oxygen Index

    1. Piimpawu zemveliso

    1. Ulawulo lwesikrini sokuchukumisa esinombala opheleleyo, misela nje ixabiso loxinzelelo lweoksijini kwisikrini sokuchukumisa, inkqubo iya kulungelelanisa ngokuzenzekelayo ibhalansi yoxinzelelo lweoksijini kwaye ikhuphe isandi esivakalayo, isuse ingxaki yokulungiswa ngesandla koxinzelelo lweoksijini;

    2. Ivalvu ehambelanayo yenyathelo iphucula kakhulu ukuchaneka kolawulo lwesantya sokuhamba, kwaye ulawulo oluvaliweyo lusetyenziselwa ukulungisa ngokuzenzekelayo inkqubo yokushukuma koxinzelelo lwe-oksijini kuvavanyo ukuya kwixabiso elijoliswe kulo, kuthintelwe iingxaki zemitha yesalathisi se-oksijini yendabuko engenakukwazi ukulungisa uxinzelelo lwe-oksijini kuvavanyo, kwaye iphucula kakhulu ukuchaneka kovavanyo.

     

    II.Iiparameter zobugcisa ezifanelekileyo:

    1. I-sensor ye-oksijini engenisiweyo, uxinaniso lwe-oksijini yokubonisa yedijithali ngaphandle kokubalwa, ukuchaneka okuphezulu kunye nokuchaneka ngakumbi, uluhlu luyi-0-100%.

    2. Isisombululo sedijithali: ± 0.1%

    3. Ukuchaneka komlinganiselo: inqanaba le-0.1

    4. Inkqubo yokuseta isikrini sokuchukumisa ilungisa ngokuzenzekelayo uxinzelelo lweoksijini

    5. Ukuchaneka kokulinganisa ngokucofa kanye

    6. Ugxininiso olunye oluphambili lokuthelekisa

    7. Isandi sesilumkiso esizenzekelayo sozinzo lweoksijini

    8. Ngomsebenzi wexesha

    9. Idatha yovavanyo ingagcinwa

    10. Idatha yembali ingabuzwa

    11. Idatha yembali ingasuswa

    12. Ungakhetha ukuba utshise i-50mm okanye cha

    13. Isilumkiso sempazamo yomthombo womoya

    14. Ulwazi ngempazamo ye-oxygen sensor

    15. Unxibelelwano olungalunganga lweoksijini kunye ne-nitrogen

    16. Iingcebiso zokwaluphala kwe-oxygen sensor

    17. Igalelo eliqhelekileyo loxinzelelo lweoksijini

    18. Ububanzi besilinda yokutsha bunokubekwa (iinkcukacha ezimbini eziqhelekileyo azinyanzelekanga)

    19. Uluhlu lolawulo lokuhamba kwamanzi: 0-20L/min (0-1200L/h)

    20. Isilinda yeglasi yeQuartz: Khetha enye kwezi nkcukacha zimbini (ububanzi bangaphakathi ≥75㎜ okanye ububanzi bangaphakathi ≥85㎜)

    21. Izinga lokuhamba kwegesi kwisilinda yokutsha: 40mm±2mm/s

    22. Ubukhulu obupheleleyo: 650mm×400×830mm

    23. Indawo yovavanyo: Ubushushu obuphakathi: ubushushu begumbi ~ 40℃; Ukufuma okunxulumeneyo: ≤70%;

    24. Uxinzelelo lokufaka: 0.25-0.3MPa

    25. Uxinzelelo olusebenzayo: initrogen 0.15-0.20Mpa Ioksijini 0.15-0.20Mpa

    26. Iikliphu zesampulu zingasetyenziselwa iiplastiki ezithambileyo neziqinileyo, zonke iintlobo zezixhobo zokwakha, amalaphu, iingcango zomlilo, njl.njl.

    27. Inkqubo yokutsha yepropane (butane), umlomo wokutsha wenziwe ngetyhubhu yesinyithi, enobubanzi bangaphakathi be-Φ2±1mm umlomo ekupheleni, onokugotywa ngokukhululekileyo. Ingafakwa kwisilinda yokutsha ukuze itshise isampuli, ubude belilangatye: 16±4mm, ubungakanani obuphakathi kwe-5mm ukuya kwi-60mm bunokulungiswa ngokukhululekileyo,

    28. Igesi: i-nitrogen yemizi-mveliso, ioksijini, ubumsulwa > 99%; (Qaphela: Umthombo womoya kunye nentloko yokudibanisa zibonelelwa ngumsebenzisi)

    Iingcebiso:Xa uvavanyo lwe-oxygen index, kuyimfuneko ukusebenzisa ubuncinane i-98% ye-oxygen/nitrogen yomgangatho wezoshishino ibhotile nganye njengomthombo womoya, kuba igesi engentla yimveliso yokuthutha enobungozi obukhulu, ayinakubonelelwa njengezixhobo zovavanyo lwe-oxygen index, inokuthengwa kuphela kwisikhululo sepetroli sendawo yomsebenzisi. (Ukuze kuqinisekiswe ubunyulu begesi, nceda uthenge kwisikhululo sepetroli sendawo esiqhelekileyo.)

    1. Iimfuno zamandla: AC220 (+10%) V, 50HZ
    2. Amandla aphezulu: 150W

    31.Ikliphu yesampulu yezinto ezizixhasayo: inokuxhonywa kwindawo yeshaft yesilinda yokutsha kwaye ingabamba isampuli ngokuthe nkqo

    32. Inketho: ikliphu yesampulu yezinto ezingazixhasi: ingalungisa amacala amabini athe nkqo esampuli kwisakhelo ngaxeshanye (isetyenziswa kwizinto ezithambileyo ezingazixhasi ezinje ngelaphu)

    33.Isiseko sesilinda yokutsha singaphuculwa ukuqinisekisa ukuba ubushushu begesi exutyiweyo bugcinwa kwi-23℃ ~ 2℃ (nxibelelana neentengiso ukuze ufumane iinkcukacha)

    4

    Umzobo obonakalayo wesiseko solawulo lobushushu

     III. Ukuhlangabezana nomgangatho:

    Umgangatho woyilo: GB/T 2406.2-2009

     

    Qaphela: Inzwa yeoksijini

    1. Ukwaziswa kwe-oxygen sensor: Kuvavanyo lwe-oxygen index, umsebenzi we-oxygen sensor kukuguqula i-chemical signal of combustion ibe yi-electronic signal eboniswe phambi komqhubi. I-sensor ilingana nebhetri, esetyenziswa kube kanye kuvavanyo ngalunye, kwaye okukhona i-frequency yomsebenzisi esetyenziswa rhoqo okanye ixabiso le-oxygen index yezinto zovavanyo liphezulu, kokukhona i-oxygen sensor iya kuba nokusetyenziswa okuphezulu.

    2. Ukugcinwa kwe-sensor ye-oksijini: Ngaphandle kokulahleka okuqhelekileyo, la manqaku mabini alandelayo ekugcinweni nasekugcinweni anceda ukwandisa ubomi benkonzo ye-sensor ye-oksijini:

    1). Ukuba izixhobo azidingi kuvavanywa ixesha elide, isenzi se-oksijini singasuswa kwaye indawo yokugcina i-oksijini ingahlukaniswa ngeendlela ezithile kubushushu obuphantsi. Indlela elula yokusebenza ingakhuseleka ngokufanelekileyo ngeplastiki yokusonga ize ibekwe kwifriji efrijini.

    2). Ukuba izixhobo zisetyenziswa rhoqo (njengexesha lomjikelo wenkonzo leentsuku ezintathu okanye ezine), ekupheleni kosuku lovavanyo, isilinda yeoksijini ingacinywa umzuzu omnye okanye emibini ngaphambi kokuba isilinda ye-nitrogen icinywe, ukuze i-nitrogen izaliswe kwezinye izixhobo zokuxuba ukunciphisa impendulo engasebenziyo yesivamvo seoksijini kunye noqhagamshelwano lweoksijini.

     

     

     

     

     

     IV. Itheyibhile yemeko yofakelo:

    Imfuneko yendawo

    Ubungakanani obupheleleyo

    I-L65*W40*H83cm

    Ubunzima (KG)

    30

    Ibhentshi yoVavanyo

    Ibhentshi yokusebenzela ingabi ngaphantsi kwe-1 m ubude kwaye ingabi ngaphantsi kwe-0.75 m ububanzi

    Imfuneko yamandla

    I-Voltage

    220V ± 10% 、50HZ

    Amandla

    100W

    Amanzi

    No

    Ubonelelo ngegesi

    Igesi: i-nitrogen yemizi-mveliso, ioksijini, ubumsulwa > 99%; Ivalvu yokunciphisa uxinzelelo lwetafile ephindwe kabini ehambelanayo (ingalungiswa nge-0.2 mpa)

    Inkcazo yongcoliseko

    umsi

    Imfuneko yokungenisa umoya

    Esi sixhobo masibekwe kwindawo yokukhupha umoya okanye siqhagamshelwe kwinkqubo yokucoca nokucoca igesi yolwelo

    Ezinye iimfuno zovavanyo

    Ivalvu yokunciphisa uxinzelelo lwe-gauge ezimbini yesilinda (i-0.2 mpa inokulungiswa)

     

     

     

     

     

     

     

    V. Umboniso obonakalayo:

    Luhlaza iindawo kunye nomatshini,

    Bomvu iindawo ezilungiselelwe nguabasebenzisi ngabo

    5

    uphandoiinkcukacha
  • I-YYP 4207 Isalathisi sokulandelela esiQhathaniswayo (i-CTI)

    I-YYP 4207 Isalathisi sokulandelela esiQhathaniswayo (i-CTI)

    Intshayelelo yezixhobo:

    Ii-electrode zeplatinum ezizinxantathu ziyasetyenziswa. Amandla asetyenziswa zii-electrode ezimbini kwisampuli yi-1.0N kunye ne-0.05N ngokwahlukeneyo. I-voltage ingalungiswa ngaphakathi koluhlu lwe-100 ~ 600V (48 ~ 60Hz), kwaye i-current-circuit current ingalungiswa ngaphakathi koluhlu lwe-1.0A ukuya kwi-0.1A. Xa i-current-circuit leakage ilingana okanye ingaphezulu kwe-0.5A kwisekethe yovavanyo, ixesha kufuneka ligcinwe imizuzwana emi-2, kwaye i-relay iya kusebenza ukusika i-current, nto leyo ebonisa ukuba isampuli ayifanelekanga. Ixesha elihlala lihleli lesixhobo se-drip lingalungiswa, kwaye i-drip volume ingalawulwa ngokuchanekileyo ngaphakathi koluhlu lwe-44 ukuya kwi-50 drops/cm3 kwaye ixesha le-drip lingalungiswa ngaphakathi koluhlu lwe-30±5 seconds.

     

    Ukuhlangabezana nomgangatho:

    GB/T4207、GB/T 6553-2014、GB4706.1 ASTM D 3638-92、IEC60112、UL746A

     

    Umgaqo wovavanyo:

    Uvavanyo lokukhupha ukuvuza lwenziwa phezu kwezinto eziqinileyo zokukhusela ubushushu. Phakathi kwee-electrode ezimbini zeplatinum ezinobukhulu obuthile (2mm × 5mm), kusetyenziswa i-voltage ethile kwaye ulwelo oluqhubayo lomthamo othile (0.1% NH4Cl) luwiswa kubude obuthile (35mm) ngexesha elimiselweyo (30s) ukuvavanya ukusebenza kokumelana nokuvuza komphezulu wezinto zokukhusela ubushushu phantsi kwesenzo esidibeneyo sentsimi yombane kunye nendawo efumileyo okanye engcolileyo. Isalathisi sokukhupha ukuvuza esithelekisekayo (CT1) kunye nesalathisi sokumelana nokuvuza (PT1) ziyamiselwa.

    Izalathisi zobugcisa eziphambili:

    1. Igumbiumthamo: ≥ 0.5 cubic metres, kunye nomnyango wokujonga iglasi.

    2. Igumbiizinto: Zenziwe ngepleyiti yentsimbi engagqwaliyo eyi-1.2MM ubukhulu bayo obuyi-304.

    3. Umthwalo wombane: I-voltage yovavanyo ingalungiswa ngaphakathi kwe-100 ~ 600V, xa i-short-circuit current iyi-1A ± 0.1A, ukuhla kwe-voltage akufanele kudlule i-10% kwimizuzwana emi-2. Xa i-short-circuit leakage current kwi-test circuit ilingana okanye ingaphezulu kwe-0.5A, i-relay isebenza kwaye inqumla i-current, nto leyo ebonisa ukuba isampuli yovavanyo ayifanelekanga.

    4. Ukunyanzela isampuli ngee-electrode ezimbini: Ukusebenzisa ii-electrode zeplatinum ezizingxande, amandla kwisampuli yee-electrode ezimbini yi-1.0N ± 0.05N ngokwahlukeneyo.

    5. Isixhobo solwelo oluwisayo: Ukuphakama kolwelo oluwisayo lungalungiswa ukusuka kwi-30mm ukuya kwi-40mm, ubungakanani bolwelo oluwisayo bungama-44 ~ 50 drops / cm3, ixesha eliphakathi kolwelo oluwisayo yi-30 ± 1 seconds.

    6. Iimpawu zemveliso: Izinto ezakhiweyo zebhokisi yovavanyo zenziwe ngentsimbi engagqwaliyo okanye ubhedu, ezineentloko ze-electrode yobhedu, ezimelana nobushushu obuphezulu kunye nokugqwala. Ukubalwa kokuwa kolwelo kuchanekile, kwaye inkqubo yolawulo izinzile kwaye ithembekile.

    7. Umbane: AC 220V, 50Hz

    uphandoiinkcukacha
  • Isihlalutyi seGravimetric yoBushushu seYY-1000B (TGA)

    Isihlalutyi seGravimetric yoBushushu seYY-1000B (TGA)

    Iimbonakalo:

    1. Ulwakhiwo lokuchukumisa olukwisikrini esibanzi semboni lunolwazi oluninzi, kubandakanya ukuseta ubushushu, ubushushu besampuli, njl.
    2. Sebenzisa ujongano lonxibelelwano lwenethiwekhi ye-gigabit, unxibelelwano luqinile, unxibelelwano luthembekile ngaphandle kokuphazamiseka, luxhasa umsebenzi woqhagamshelo lokuzihlaziya.
    3. Umzimba wesithando uncinci, ubushushu buyaguquguquka kwaye isantya sokuwa siyaguquguquka.
    4. Inkqubo yokuhlamba ngamanzi kunye nobushushu, ubushushu bomzimba wesithando sobushushu obuphezulu kubunzima bomlinganiselo.
    5. Inkqubo yokufakela ephuculweyo, yonke isebenzisa ukulungiswa koomatshini; intonga yokuxhasa isampuli inokutshintshwa ngokulula kwaye into eqhotsiweyo inokuthelekiswa neemodeli ezahlukeneyo ngokweemfuno, ukuze abasebenzisi babe neemfuno ezahlukeneyo.
    6. Imitha yokuhamba itshintsha ngokuzenzekelayo ukuhamba kwegesi kabini, isantya sokutshintsha ngokukhawuleza kunye nexesha elifutshane elizinzileyo.
    7. Iisampuli kunye neetshathi ezisemgangathweni zibonelelwa ukuze kube lula ukulinganisa ubushushu obungaguqukiyo kubathengi.
    8. Isoftware ixhasa isikrini ngasinye esisisombululo, ilungisa ngokuzenzekelayo imo yokubonisa ubungakanani besikrini sekhompyutha. Ixhasa ilaptop, idesktop; Ixhasa iWIN7, iWIN10, iWIN11.
    9. Xhasa indlela yokusebenza yesixhobo sokuhlela umsebenzisi ngokweemfuno zokwenyani ukuze kufezekiswe ukuzenzekelayo ngokupheleleyo kwamanyathelo okulinganisa. Isoftware inika imiyalelo emininzi, kwaye abasebenzisi banokudibanisa ngokuguquguquka baze bagcine umyalelo ngamnye ngokweendlela zabo zokulinganisa. Imisebenzi enzima incitshiswa ibe yimisebenzi yokucofa kube kanye.
    10. Ulwakhiwo lomzimba wesithando olusisigxina se-oven, ngaphandle kokuphakamisa phezulu nasezantsi, kulula kwaye kukhuselekile, izinga lokunyuka nokuwa linokulungiswa ngokungacwangciswanga.
    11. Isibambi sesampulu esisuswayo sinokuhlangabezana neemfuno ezahlukeneyo emva kokutshintshwa ukuze kube lula ukucoca nokulungisa emva kongcoliseko lwesampulu.
    12. Ezi zixhobo zamkela inkqubo yokulinganisa ibhalansi yohlobo lwekomityi ngokomgaqo webhalansi ye-electromagnetic.

    Iiparameter:

    1. Uluhlu lobushushu: RT~1000℃
    2. Isisombululo sobushushu: 0.01℃
    3. Izinga lokufudumeza: 0.1 ～80℃/min
    4. Izinga lokuphola: 0.1℃/min-30℃/min (Xa ingaphezulu kwe-100℃, inganciphisa ubushushu ngesantya sokuphola)
    5. Imo yokulawula ubushushu: Ulawulo lobushushu be-PID
    6. Uluhlu lokulinganisa ubunzima: 2g (hayi uluhlu lobunzima besampuli)
    7. Isisombululo sobunzima: 0.01mg
    8. Ulawulo lwegesi: I-nitrogen, i-oksijini (ukutshintsha ngokuzenzekelayo)
    9. Amandla: 1000W, AC220V 50Hz okanye wenze ngokwezifiso eminye imithombo yamandla esemgangathweni
    10. Iindlela zonxibelelwano: Unxibelelwano lwesango leGigabit
    11. Ubungakanani obuqhelekileyo bokubethelwa (Ububanzi obuphezulu *): 10mm * φ6mm.
    12. Inkxaso enokutshintshwa, ilungele ukuqhaqhwa nokucoca, kwaye ingatshintshwa nge-crucible yeenkcukacha ezahlukeneyo
    13. Ubungakanani bomatshini: 70cm*44cm*42 cm, 50kg (82*58*66cm, 70kg, kunye nokupakisha kwangaphandle).

    Uluhlu loqwalaselo:

    1. Uhlalutyo lweThermogravimetric–       Iseti e-1
    2. Izinto zokugquma zeCeramic (Φ6mm * 10mm)– 50pcs
    3. Iintambo zombane kunye nentambo ye-Ethernet—    Iseti e-1
    4. I-CD (iqulethe isoftware kunye nevidiyo yokusebenza)— 1pcs
    5. Isitshixo seSoftware—-                   1pcs
    6. Ityhubhu yeoksijini, ityhubhu yomoya enenitrogen kunye netyhubhu yokukhupha umoya—imitha yesi-5 nganye
    7. Incwadi yemiyalelo yokusebenza—    1pcs
    8. Isampulu esemgangathweni—(IsiNgesi)iqulethe i-1g yeCaC2O4·H2O kunye ne-1g CuSO4）
    9. I-Tweezer 1pcs, i-screwdriver 1pcs kunye neepuni zamayeza 1pcs
    10. I-valve edityanisiweyo yokunciphisa uxinzelelo ngokwezifiso kunye ne-2pcs edityanisiweyo ngokukhawuleza
    11. Ifusi—   4pcs

     

     

     

     

     

     

    uphandoiinkcukacha
  • I-DSC-BS52 Differential scanning calorimeter (DSC)

    I-DSC-BS52 Differential scanning calorimeter (DSC)

    Isishwankathelo:

    I-DSC luhlobo lwesikrini sokuchukumisa, oluvavanya ngokukodwa uvavanyo lwexesha lokungeniswa kwe-oxidation yezinto zepolymer, ukusebenza kwesitshixo esinye somthengi, kunye nokusebenza ngokuzenzekelayo kwesoftware.

    Ukuthobela le migangatho ilandelayo:

    GB/T 19466.2- 2009/ISO 11357-2:1999

    GB/T 19466.3- 2009/ISO 11357-3:1999

    GB/T 19466.6- 2009/ISO 11357-6:1999

     

    Iimbonakalo:

    Ulwakhiwo lokuchukumisa olukwinqanaba leshishini lunolwazi oluninzi, kubandakanya ubushushu bokuseta, ubushushu besampulu, ukuhamba kweoksijini, ukuhamba kwenitrogen, isignali yobushushu eyahlukileyo, iimeko ezahlukeneyo zokutshintsha, njl.

    Ujongano lonxibelelwano lwe-USB, ukufana okuqinileyo, unxibelelwano oluthembekileyo, uxhasa umsebenzi woqhagamshelo oluzibuyisela ngokwalo.

    Ulwakhiwo lwesithando somlilo luncinci, kwaye izinga lokunyuka nokupholisa liyalungiseka.

    Inkqubo yokufakela iphuculwe, kwaye indlela yokulungisa oomatshini iyasetyenziswa ukuze kuthintelwe ngokupheleleyo ukungcoliswa kwe-colloidal yangaphakathi yesithando somlilo ukuya kwisignali yobushushu eyahlukileyo.

    Isithando somlilo sifudunyezwa ngocingo lokufudumeza lombane, kwaye isithando somlilo sipholiswa ngamanzi apholisayo ajikelezayo (afakwe efrijini ngecompressor), isakhiwo esincinci kunye nobukhulu obuncinci.

    Iprobe yobushushu obuphindwe kabini iqinisekisa ukuphindaphindeka okuphezulu komlinganiselo wobushushu besampulu, kwaye isebenzisa iteknoloji ekhethekileyo yokulawula ubushushu ukulawula ubushushu bodonga lwesithando somlilo ukuseta ubushushu besampulu.

    Imitha yokuhamba kwegesi itshintsha ngokuzenzekelayo phakathi kweendlela ezimbini zegesi, ngesantya sokutshintsha esikhawulezayo kunye nexesha elifutshane elizinzileyo.

    Isampulu eqhelekileyo ibonelelwe ukuze kube lula ukulungisa i-coefficient yobushushu kunye ne-coefficient yexabiso le-enthalpy.

    Isoftware ixhasa isikrini ngasinye esinokulungiswa, ilungisa ngokuzenzekelayo imo yokubonisa ubungakanani besikrini sekhompyutha. Ixhasa ilaptop, idesktop; Ixhasa iWin2000, XP, VISTA, WIN7, WIN8, WIN10 kunye nezinye iinkqubo zokusebenza.

    Xhasa indlela yokusebenza yesixhobo sokuhlela umsebenzisi ngokweemfuno zokwenyani ukuze kufezekiswe ukuzenzekelayo ngokupheleleyo kwamanyathelo okulinganisa. Isoftware inika imiyalelo emininzi, kwaye abasebenzisi banokudibanisa ngokuguquguquka baze bagcine umyalelo ngamnye ngokweendlela zabo zokulinganisa. Imisebenzi enzima incitshiswa ibe yimisebenzi yokucofa kube kanye.

    uphandoiinkcukacha
  • Isivavanyeli sokwanda kobushushu se-YY-1000A

    Isivavanyeli sokwanda kobushushu se-YY-1000A

    Isishwankathelo:

    Le mveliso ifanelekile ukulinganisa ulwandiso kunye neempawu zokuncitshiswa kwezinto zesinyithi, izinto zepolymer, iiceramics, iiglazes, ii-refractories, iglasi, igraphite, ikhabhoni, i-corundum kunye nezinye izinto ngexesha lenkqubo yokutshiswa kobushushu phantsi kobushushu obuphezulu. Iiparameter ezifana ne-linear variable, i-linear expansion coefficient, i-volume expansion coefficient, i-rapid thermal expansion, i-softening temperature, i-sintering kinetics, i-glass transition temperature, i-phase transition, i-density change, i-sintering rate control inokulinganiswa.

     

    Iimbonakalo:

    1. Isakhiwo sokuchukumisa isikrini esibanzi se-intshi ezi-7, esibonisa ulwazi olutyebileyo, kubandakanya ubushushu obumiselweyo, ubushushu besampuli, isignali yokufuduka yokwandiswa.
    2. Unxibelelwano lwentambo yenethiwekhi yeGigabit, ukufana okuqinileyo, unxibelelwano oluthembekileyo ngaphandle kokuphazamiseka, luxhasa umsebenzi woqhagamshelo lokuzibuyisela.
    3. Umzimba wesithando sesinyithi sonke, ulwakhiwo oluncinci lomzimba wesithando, isantya sokunyuka nokuwa esilungisekayo.
    4. Ukufudumeza umzimba wesithando kusebenzisa indlela yokufudumeza ityhubhu yekhabhoni yesilicon, isakhiwo esincinci, kunye nomthamo omncinci, ohlala ixesha elide.
    5. Imo yokulawula ubushushu be-PID ukulawula ukunyuka kobushushu obuhambelanayo bomzimba wesithando.
    6. Ezi zixhobo zamkela isenzi sobushushu beplatinum esingamelani nobushushu obuphezulu kunye nesenzi sokutshintsha esichanekileyo ukuze zibone isignali yokwandisa ubushushu besampuli.
    7. Isoftware ihambelana nesikrini sekhompyutha sesisombululo ngasinye kwaye ilungisa imo yokubonisa yegophe ngalinye ngokuzenzekelayo ngokobukhulu besikrini sekhompyutha. Incwadana yokuxhasa, idesktop; Ixhasa iWindows 7, iWindows 10 kunye nezinye iinkqubo zokusebenza.
    uphandoiinkcukacha
  • Ikhabhinethi yoKhuseleko lwebhayoloji ye-YY-700IIA2-EP (idesktop)

    Ikhabhinethi yoKhuseleko lwebhayoloji ye-YY-700IIA2-EP (idesktop)

    Iimpawu zeMveliso:

    1. Uyilo lokwahlulwa kwamakhethini omoya ukuthintela ukungcoliseka phakathi kwangaphakathi nangaphandle. I-30% yomoya iyakhutshwa kwaye i-70% iyajikeleziswa kwakhona. Uxinzelelo olubi oluhamba ngokuthe nkqo lwe-laminar ngaphandle kwesidingo sokufakelwa kwemibhobho.

    2. Iingcango zeglasi ezityibilikayo ezinyukayo nezisezantsi ezinokubekwa ngokukhululekileyo, kulula ukuzisebenzisa, kwaye zinokuvalwa ngokupheleleyo ukuze zibulawe iintsholongwane. Isilumkiso somda wokuphakama sokubeka.

    3. Iisokhethi zokukhupha umbane kwindawo yokusebenza, ezixhotyiswe ngeesokhethi ezingangeni manzi kunye neendawo zokudibanisa amanzi, nto leyo enika lula kakhulu kubaqhubi.

    4. Kufakelwe izihluzo ezikhethekileyo kwindawo yokukhupha umoya ukuze kulawulwe ukukhutshwa komoya kunye nongcoliseko.

    5. Indawo yokusebenza ayinayo inkunkuma evuzayo. Yenziwe ngentsimbi engagqwaliyo ye-304 ekumgangatho ophezulu, ithambile, ayinamthungo, kwaye ayinazo iikona ezifileyo, nto leyo eyenza kube lula ukuyicoca ngokupheleleyo kwaye imelane nokugqwala kunye nokutshatyalaliswa kwentsholongwane.

    6. Ilawulwa yiphaneli yekristale yolwelo ye-LED, enesixhobo sokukhusela isibane se-UV sangaphakathi. Isibane se-UV sisebenza kuphela xa ifestile yangaphambili kunye nesibane se-fluorescent zicinyiwe, kwaye sinomsebenzi wokulinganisa ixesha lesibane se-UV.

    I-engile yokuthambeka eyi-10°, ehambelana noyilo oluchanekileyo.

    uphandoiinkcukacha
  • IKhabhinethi yoKhuseleko lweBio lweYY-B2 Series

    IKhabhinethi yoKhuseleko lweBio lweYY-B2 Series

    Iimpawu zeMveliso

    1. Uyilo lokwahlulwa kwamakhethini omoya luthintela ungcoliseko lwangaphakathi nolwangaphandle, kunye nokuhamba komoya okuphumayo nge-100%, ukuhamba koxinzelelo olungalunganga oluthe nkqo, kwaye akukho mfuneko yokufaka imibhobho.

     

    2. Iglasi engaphambili ingashukunyiswa phezulu nasezantsi ivumela indawo ebekwe ngokungacwangciswanga elula ukuyisebenzisa, kwaye ivalwe ngokupheleleyo ukuze kubulawe iintsholongwane. Isilumkiso somda wokuphakama kwendawo sikhuthaza.

     

    3. Isokhethi yokukhupha umbane kwindawo yokusebenza ixhotyiswe ngeesokhethi ezingangeni manzi kunye neendawo zokukhupha amanzi amdaka, nto leyo enika lula kakhulu kubaqhubi

     

    4. Isihluzi se-HEPA sifakwe kwindawo yokukhupha umoya ukulawula ungcoliseko lomoya

     

    5. Indawo yokusebenza yenziwe ngentsimbi engagqwaliyo ye-304 ekumgangatho ophezulu, egudileyo, engenamthungo, kwaye engenazo iikona ezifileyo. Ingacocwa ngokulula nangokucokisekileyo ukuthintela ukugqwala kunye nokukhukuliseka kwe-disinfectant.

     

    6. Ilawulwa yiphaneli ye-LCD enesixhobo sokukhusela ukukhanya kwe-UV esakhelwe ngaphakathi, inokuvulwa kuphela xa ucango lokhuseleko luvaliwe.

     

    7. Ixhotyiswe nge-DOP test port kunye ne-differential pressure gauge eyakhelwe ngaphakathi.

     

    I-engile yokuthambekela ye-8. 10 °, ehambelana neengcamango zoyilo lomzimba womntu.

    uphandoiinkcukacha
<< < Eyangaphambili123456Okulandelayo >>> Iphepha 3 / 31
Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale