Wamkelekile kwiiwebhusayithi zethu!
English
网站焦点图
I-Rubber & Izixhobo zoVavanyo lwePlastiki
Izixhobo zokuvavanya i-Textile
ibhanile

Iimveliso

  • YY707 Irabha Ukudinwa Ukuqhekeka Tester

    YY707 Irabha Ukudinwa Ukuqhekeka Tester

    I.Isicelo:

    Umvavanyi wokudinwa kwerabha usetyenziselwa ukulinganisa iipropathi zokuqhekeka kwerabha evulziweyo,

    izicathulo zerabha kunye nezinye izinto emva kokuphindaphinda ngokuphindaphindiweyo.

     

    II.Ukuhlangabezana nomgangatho:

    GB/T 13934, GB/T 13935、GB/T 3901、GB/T 4495、 ISO 132、ISO 133

     

    ukubuzaiinkcukacha
  • I-YY707A yerabha yokuFatigue yokuNgqogqa iTester

    I-YY707A yerabha yokuFatigue yokuNgqogqa iTester

    I.Isicelo:

    Umvavanyi wokudinwa kwerabha usetyenziselwa ukulinganisa iipropathi zokuqhekeka kwerabha evulziweyo,

    izicathulo zerabha kunye nezinye izinto emva kokuphindaphinda ngokuphindaphindiweyo.

     

    II.Ukuhlangabezana nomgangatho:

    GB/T 13934, GB/T 13935、GB/T 3901、GB/T 4495、 ISO 132、ISO 133

    ukubuzaiinkcukacha
  • I-YY ST05B IiNqaku eziHlanu zoMvavanyi woBubushushu beSitywina seGradient

    I-YY ST05B IiNqaku eziHlanu zoMvavanyi woBubushushu beSitywina seGradient

    Iintshayelelo:

    Umvavanyi wetywina lobushushu sisixhobo sebhubhoratri esiyimfuneko kumashishini okutya, amashishini axuba amayeza, amashishini emveliso yeekhemikhali zemihla ngemihla, ukupakishwa kunye namashishini okuvelisa izinto ezikrwada.

    Iimeko zayo zokusebenza zifanisa uxinzelelo, ukushisa kunye nexesha lomgca wokupakisha kwinkqubo yokupakisha yomgca wokupakisha. Ngesixhobo, izinto eziphathekayo zinokuvavanywa ngokukhawuleza kwaye zingasetyenziselwa kumgca wokuvelisa emva kovavanyo. Olunye usetyenziso kukufudumeza ukutywina izinto zokupakisha eziguquguqukayo phantsi kobushushu obubekiweyo, uxinzelelo kunye nexesha, ukuze kube lula kwaye ngokukhawuleza.

    fumana ubushushu obuhle bezinto eziphathekayo

    Iiparamitha zenkqubo yokutywina ukuhlangabezana neemfuno zokupakisha kunye nokupakisha abavelisi bezinto eziphathekayo kwiiparamitha ezilungileyo zokutywinwa kobushushu bezinto.

     

    II.Umgangatho weNtlanganiso:

    QB/T 2358(ZBY 28004), ASTM F2029,YBB 00122003

    ukubuzaiinkcukacha
  • (eTshayina)YY6-Ukukhanya kweKhabhinethi yoVavanyo lweMbala eyi-6 yoMthombo (iinyawo ezi-4)

    (eTshayina)YY6-Ukukhanya kweKhabhinethi yoVavanyo lweMbala eyi-6 yoMthombo (iinyawo ezi-4)

    1. Ukusebenza kweKhabhinethi yesibane
      1. Ukukhanya kwemini okwenziwe ngeHepachromic okuvunywe yiCIE, 6500K lobushushu bombala.
      2. Umda wokukhanyisa: 750-3200 Luxes.
      3. Umbala ongasemva womthombo wokukhanya yiNtuthuko yeNgwevu ye-absorbence.Usebenzisa ikhabhathi yesibane, thintela ukukhanya kwangaphandle ukuba kubonakale kwinqaku eliza kujongwa. Musa ukubeka naziphi na izinto ezingabalulekanga kwikhabhinethi.
      4. Ukwenza uvavanyo lwe-metamerism.Nge-microcomputer, ikhabhinethi inokutshintsha phakathi kwemithombo yokukhanya eyahlukeneyo ngexesha elifutshane kakhulu ukujonga umahluko wemibala yeempahla phantsi komthombo wokukhanya owahlukileyo. Xa ulayita, Thintela isibane ekukhanyeni njengoko isibane sefluorescent sasekhaya sikhanyiswa.
      5. Rekhoda ngokuchanekileyo ixesha lokusetyenziswa kweqela ngalinye lesibane. Ingakumbi iD65 standar dlamp iya kutshintshwa emva kokusetyenziswa ngaphezulu kwe 2,000 hrs, kuthintelwa impazamo ebangelwe sisibane esidala.
      6. Umthombo wokukhanya we-UV wokujonga amanqaku aqulathe idayi yefluorescent okanye emhlophe, okanye asetyenziswe ukongeza i-UV kwi-D65 yomthombo wokukhanya.
      7. Thenga umthombo wokukhanya. Abathengi baphesheya kolwandle bahlala befuna omnye umthombo wokukhanya ukujonga umbala. Umzekelo, abathengi base-USA abafana neCWF kunye nabathengi baseYurophu naseJapan beTL84. Kungenxa yokuba iimpahla zithengiswa ngaphakathi kwaye ziphantsi komthombo wokukhanya wevenkile kodwa kungekhona ukukhanya kwelanga kwangaphandle. Kuya kuthandwa ngakumbi ukusebenzisa umthombo wokukhanya wevenkile ukujonga umbala.54
    ukubuzaiinkcukacha
  • IKhabhinethi yoVavanyo lweMbala ye-YY6 yoMthombo wesi-6

    IKhabhinethi yoVavanyo lweMbala ye-YY6 yoMthombo wesi-6

    I.Iinkcazelo

    IKhabhinethi yoVavanyo lweMibala, ilungele onke amashishini kunye nezicelo apho kukho imfuneko yokugcina umbala ungaguquguquki kunye nomgangatho-umz. Izithuthi, iiCeramics, izithambiso, ukutya, izihlangu, ifanitshala, i-knitwear, isikhumba, i-Ophthalmic, ukudaya, ukupakisha, ukuShicilela, ii-inks kunye nombhalo. .

    Kuba umthombo wokukhanya owahlukileyo unamandla ahlukileyo akhazimlayo, xa zifika kumphezulu wenqaku, imibala eyahlukileyo iyabonisa. Ngokubhekiselele kulawulo lombala kwimveliso yemizi-mveliso, xa umhloli ethelekisa ukuhambelana kombala phakathi kweemveliso kunye nemizekelo, kodwa kunokubakho umahluko. phakathi komthombo wokukhanya osetyenziswe apha kunye nomthombo wokukhanya osetyenziswa ngumxhasi.Kwimeko enjalo, umbala phantsi komthombo wokukhanya owahlukileyo uyahluka. Isoloko izisa imiba ilandelayo: Umxhasi wenza isikhalazo ngomahluko wombala nokuba ufuna ukwaliwa kweempahla, eyonakalise kakhulu ikhredithi yenkampani.

    Ukusombulula le ngxaki ingentla, eyona ndlela isebenzayo kukukhangela umbala omhle phantsi komthombo wokukhanya omnye .Umzekelo, uMsebenzi wamazwe ngamazwe usebenzisa i-Artificial Daylight D65 njengomthombo wokukhanya oqhelekileyo wokukhangela umbala wempahla.

    Kubaluleke kakhulu ukusebenzisa umthombo wokukhanya osemgangathweni ukujonga umahluko wombala emsebenzini wasebusuku.

    Ngaphandle komthombo wokukhanya we-D65, iTL84, CWF, UV, kunye neF/A imithombo yokukhanya iyafumaneka kule Khabhinethi yesibane ngesiphumo semetamerism.

     

    ukubuzaiinkcukacha
  • I-YY215C yoMvavanyi wokufunxa waManzi kwii-Nonwovens & neTawula

    I-YY215C yoMvavanyi wokufunxa waManzi kwii-Nonwovens & neTawula

    Ukusetyenziswa kwesixhobo:

    Ukufunxwa kwamanzi kwiitawuli eluswini, izitya kunye nomphezulu wefenitshala kuyenziwa kubomi bokwenyani ukuvavanya.

    ukufunxwa kwayo kwamanzi, olulungele uvavanyo lokufunxa amanzi kwiitawuli, iitawuli zobuso, isikwere

    iitawuli, iitawuli zokuhlambela, iitawuli kunye nezinye iimveliso zetawuli.

    Hlangana nomgangatho:

    I-ASTM D 4772-97 Indlela yoVavanyo oluQhelekileyo lokufunxwa kwaManzi oMphezulu weTawuli (Indlela yoVavanyo oluPhumayo),

    I-GB/T 22799-2009 "Imveliso yetawuli Indlela yokuvavanya ukufunxa amanzi"

    ukubuzaiinkcukacha
  • I-YY605A yokuAyina i-Ayina eSublimation yoMbala woMvavanyi wokuKhawuleza

    I-YY605A yokuAyina i-Ayina eSublimation yoMbala woMvavanyi wokuKhawuleza

    Ukusetyenziswa kwesixhobo:

    Isetyenziselwa ukuvavanya ukukhawuleza kombala kwi-ayina kunye ne-sublimation yeempahla ezahlukeneyo.

     

     

    Hlangana nomgangatho:

    I-GB/T5718, GB/T6152, FZ/T01077, ISO105-P01, ISO105-X11 kunye neminye imigangatho.

     

    ukubuzaiinkcukacha
  • Imitha yoBumhlophe ye-YYP103A

    Imitha yoBumhlophe ye-YYP103A

    Intshayelelo yemveliso

    Imitha emhlophe / yokukhanya isetyenziswa ngokubanzi ekwenzeni iphepha, ilaphu, ukuprinta, iplastiki,

    I-ceramic kunye ne-porcelain enamel, izinto zokwakha, ishishini lemichiza, ukwenza ityuwa kunye nezinye

    isebe lokuvavanya elifuna ukuvavanya ubumhlophe. YYP103A imitha yobumhlophe nayo inokuvavanya i

    ukungafihli kwephepha, ukungafihli, ukukhanya komlinganiso wokukhanya kunye ne-coefficient yokufunxa ukukhanya.

     

    Iimpawu zemveliso

    1.Vavanya ubumhlophe be-ISO (ubumhlophe be-R457) .Inokumisela kwakhona iqondo le-fluorescent whitening degree of phosphor emission.

    2. Uvavanyo lokukhanya kwe-tristimulus values ​​(Y10), i-opacity kunye nokungafihli. Vavanya ukukhanya komlinganiso wokusasaza

    kunye ne-coefficient yokufunxa ukukhanya.

    3. Xelisa i-D56. Yamkela i-CIE1964 yokongeza inkqubo yombala kunye ne-CIE1976 (L * a * b *) ifomula yombala wesithuba sombala. Yamkela i-d / o ngokuqwalasela iimeko zokukhanya kwejometri. Idayamitha yebhola yokusasazwa yi-150mm. Ubukhulu bomngxuma wokuvavanya yi-30mm okanye i-19mm. Ukuphelisa isampula yesipili ebonakaliswe ukukhanya

    izinto zokufunxa ukukhanya.

    4. Ukubonakala okutsha kunye nesakhiwo esincinci; Qinisekisa ukuchaneka kunye nokuzinza kwemilinganiselo

    idatha enoyilo lwesekethe oluphezulu.

    5. Umboniso we-LED; Amanyathelo okusebenza ngokukhawuleza ngesiTshayina. Bonisa iziphumo zamanani. Ujongano lomatshini wobuntu lwenza umsebenzi ube lula kwaye ulungele.

    6. Isixhobo sixhotyiswe nge-interface ye-RS232 eqhelekileyo ukuze ikwazi ukusebenzisana ne-microcomputer software ukunxibelelana.

    7. Izixhobo zomculo zinokhuseleko lokucinywa kombane; idatha yokulinganisa ayilahlekanga xa umbane ucinyiwe.

    ukubuzaiinkcukacha
  • (e-China)I-YYP-PL I-Tissue Tensile Strength Tester-Uhlobo lwe-Pneumatic

    (e-China)I-YYP-PL I-Tissue Tensile Strength Tester-Uhlobo lwe-Pneumatic

    1. Ingcaciso yeMveliso

    I-tisse tensile tester YYPPL sisixhobo esisisiseko sokuvavanya iimpawu ezibonakalayo zemathiriyeli

    ezifana noxinzelelo, uxinzelelo (i-tensile). Ulwakhiwo oluthe nkqo kunye nekholamu eninzi yamkelwa, kunye ne

    isithuba sechuck sinokusetwa ngaphandle koluhlu oluthile. I-stroke esolula inkulu, i

    ukubaleka uzinzo kulungile, kwaye ukuchaneka kovavanyo kuphezulu. Umatshini wokuvavanya i-tensile ubanzi

    isetyenziswe kwifiber, iplastiki, iphepha, ibhodi yephepha, ifilimu kunye nezinye izinto ezingezizo ezentsimbi uxinzelelo oluphezulu, oluthambileyo

    Iplastiki yokupakisha amandla okutywinwa kobushushu, ukukrazula, ukolula, ukuhlatywa okwahlukeneyo, ukucinezelwa,

    i-ampoule break force, i-180 degrees peel, i-90 degrees peel, i-shear force kunye nezinye iiprojekthi zovavanyo.

    Kwangaxeshanye, isixhobo sinokulinganisa amandla okuqina kwephepha, amandla okuqina,

    Ubude, ukuqhawuka kobude, ukufunxeka kwamandla athambileyo, ukuqina komnwe

    Inani, isalathisi sokufunxa amandla kunye nezinye izinto. Le mveliso ifanelekile kunyango,

    ukutya, amayeza, ukupakishwa, amaphepha kunye namanye amashishini.

     

     

     

     

     

     

     

    1. Iimpawu zeMveliso:
      1. Indlela yokuyila ye-clamp yesixhobo esingeniswayo yamkelwe ukuphepha impazamo yokufumanisa ebangelwa ngumqhubi ngenxa yeengxaki zobugcisa bokusebenza.
      2. Into yomthwalo owenziwe ngokwezifiso eziphezulu, isikrufu sokukhokela esithathwe kumazwe angaphandle ukuqinisekisa ukufuduswa okuchanekileyo
      3. Inokukhethwa ngokungenasizathu kwisantya se-5-600mm / min, lo msebenzi unokuhlangabezana ne-peel ye-180 °, amandla okuqhekeza ibhotile ye-ampoule, ukunyanzeliswa kwefilimu kunye nezinye iisampuli zokufunyanwa..
      4. Ngamandla okuqina, uvavanyo loxinzelelo oluphezulu lwebhotile yeplastiki, ifilimu yeplastiki, ukwandiswa kwephepha, amandla okuqhekeza, ubude bephepha, ukufunxa amandla, isalathisi sokuqina, isalathisi sokufunxa amandla kunye neminye imisebenzi..
      5. Iwaranti yemoto yiminyaka emi-3, iwaranti yesivamvo yiminyaka emi-5, kwaye yonke iwaranti yomatshini ngunyaka omnye, elona xesha lide lewaranti eTshayina..
      6. Uhambo olude kakhulu kunye nomthwalo omkhulu (500 kg) uyilo lwesakhiwo kunye nokukhethwa kwenzwa eguquguqukayo kuququzelela ukwandiswa kweeprojekthi ezininzi zovavanyo..

     

     

    1. Umgangatho wentlanganiso:

    TAPPI T494、ISO124、ISO 37、GB 8808、GB/T 1040.1-2006、GB/T 1040.2-2006、GB/T 1040.3-2006、GB/T 1040.4-2006、GB/T 5/T 104T 104T 104,8/T 1040/T 5/T 104/T 10408/T - 2002, GB/T 12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB/T 17591, 1 GB ASTM E4,ASTM D882,ASTM D1938、ASTM D3330、ASTM F88、ASTM F904、JIS P8113、QB/T 2358、QB/T 1130 、 YBB332002-2015 、YBB001720010 20,YBB0017200102-20,YBB0017200102-2002

     

    ukubuzaiinkcukacha
  • I-YYP-PL Ibhulukhwe yokukrazula iTensile Amandla Tester

    I-YYP-PL Ibhulukhwe yokukrazula iTensile Amandla Tester

    1. Ingcaciso yeMveliso

    I-Trouser yokukrazula i-Tensile Strength Tester sisixhobo esisisiseko sokuvavanya iimpawu ezibonakalayo

    izinto ezifana noxinzelelo, uxinzelelo (i-tensile). Ulwakhiwo oluthe nkqo kunye neekholamu ezininzi zamkelwe,

    kwaye isithuba se-chuck sinokusetwa ngaphandle koluhlu oluthile. I-stroke eyolulayo inkulu, ukuzinza kokugijima kulungile, kwaye ukuchaneka kovavanyo kuphezulu. Umatshini wokuvavanya i-tensile usetyenziswa kakhulu kwifayibha, iplastiki, iphepha, ibhodi yephepha, ifilimu kunye nezinye izinto ezingezizo ezentsimbi uxinzelelo oluphezulu, ukupakishwa kweplastiki ethambileyo yokutywina amandla okutywina ubushushu, ukukrazula, ukolula, ukuhlatywa okwahlukeneyo, ukucinezelwa, i-ampoule.

    amandla okuqhekeza, i-180 degrees peel, i-90 degrees peel, i-shear force kunye nezinye iiprojekthi zovavanyo. Kwangaxeshanye, isixhobo sinokulinganisa amandla okuqina kwephepha, amandla okuqina, ukunyusa, ukwaphuka

    ubude, ukufunxeka kwamandla okuxinana, umnwe oqinileyo

    Inani, isalathisi sokufunxa amandla kunye nezinye izinto. Le mveliso ifanelekile kunyango, ukutya, amayeza, ukupakisha, iphepha kunye namanye amashishini.

     

     

    1. Iimpawu zeMveliso:
      1. Indlela yoyilo ye-clamp yesixhobo esingeniswayo yamkelwa ukuphepha ukubhaqwa
      2. imposiso ebangelwa ngumsebenzisi ngenxa yeengxaki zobugcisa bokusebenza.
      3. Into yomthwalo owenziwe ngokwezifiso eziphezulu, isikrufu sokukhokela esithathwe kumazwe angaphandle ukuqinisekisa ukufuduswa okuchanekileyo
      4. Inokukhethwa ngokungenamthetho kwisantya se-5-600mm / min, lo msebenzi unako
      5. ukuhlangabezana ne-180 ° peel, amandla okuqhekeza ibhotile ye-ampoule, uxinzelelo lwefilimu kunye nezinye iisampulu zokuchongwa.
      6. Ngamandla okuqina, uvavanyo loxinzelelo lwebhotile yeplastiki, ifilimu yeplastiki, ukwandiswa kwephepha,
      7. ukuqhawuka kwamandla, ubude bokwaphuka kwephepha, ukufunxwa kwamandla athambileyo, isalathiso sokuqina,
      8. isalathisi sokufunxa amandla kunye neminye imisebenzi.
      9. Iwaranti yemoto yiminyaka emi-3, iwaranti yesivamvo yiminyaka emi-5, kwaye yonke iwaranti yomatshini ngunyaka omnye, elona xesha lide lewaranti eTshayina..
      10. Uhambo olude kakhulu kunye nomthwalo omkhulu (500 kg) uyilo lwesakhiwo kunye nokukhethwa kwenzwa eguquguqukayo kuququzelela ukwandiswa kweeprojekthi ezininzi zovavanyo..

     

     

    1. Umgangatho wentlanganiso:

    ISO 6383-1、GB/T 16578、ISO 37、GB 8808、GB/T 1040.1-2006、GB/T 1040.2-2006、

    GB/T 1040.3-2006、GB/T 1040.4-2006、GB/T 1040.5-2008、GB/T 4850- 2002、GB/T 12914-2008、GB/T 17200、GB/T 16208、GB/T 16208、GB/T 16208. 7122, GB/T 2790, GB/T 2791, GB/T 2792,

    GB/T 17590、 GB 15811、ASTM E4、ASTM D882、ASTM D1938、ASTM D3330、ASTM F88、ASTM F904、JIS P8113、QB/T 2358、QB/T 1130、YBB3320150102、YBB301501002,Y2,Y201002,Y2,Y201002002 0152002-2015

     

    ukubuzaiinkcukacha
  • I-YYP-A6 yokuPakisha uMvavanyi woxinzelelo

    I-YYP-A6 yokuPakisha uMvavanyi woxinzelelo

    Ukusetyenziswa kwesixhobo:

    Isetyenziselwa ukuvavanya iphakheji yokutya (iphakheji yesosi ye-noodle, iphakheji ye-ketchup, iphakheji yesaladi,

    iphakheji yemifuno, iphakheji ye-jam, iphakheji yekhrimu, iphakheji yonyango, njl.) kufuneka wenze i-static

    uvavanyo loxinzelelo. Iipakethi ezi-6 zesosi ezigqityiweyo zinokuvavanywa ngexesha. Into yovavanyo: Jonga i

    ukuvuza kunye nomonakalo wesampuli phantsi koxinzelelo olusisigxina kunye nexesha elimiselweyo.

     

    Umgaqo wokusebenza wesixhobo:

    Isixhobo silawulwa yi-microcomputer yokuthintela, ngokulungelelanisa ukunciphisa uxinzelelo

    ivalve ukwenza i-cylinder ifikelele kuxinzelelo olulindelekileyo, ixesha le-microcomputer, ulawulo

    ukubuyisela umva kwevalve ye-solenoid, lawula isenzo saphezulu nasezantsi soxinzelelo lwesampulu

    ipleyiti, kwaye uqaphele imeko yokutywinwa kwesampuli phantsi koxinzelelo oluthile kunye nexesha.

    ukubuzaiinkcukacha
  • YYP112-1 Halogen Ukufuma imitha

    YYP112-1 Halogen Ukufuma imitha

    Umgangatho:

    I-AATCC 199 Ixesha lokumisa i-Textiles : Indlela yokuHlalutya ukufuma

    I-ASTM D6980 Indlela yoVavanyo oluQhelekileyo lokuQinisekisa ukufuma kwiPlastiki ngokuLahla kubunzima

    I-JIS K 0068 Iindlela zoVavanyo lwesiqulatho samanzi kwiimveliso zemichiza

    ISO 15512 Plastiki-Ukumiselwa komxholo wamanzi

    ISO 6188 Plastiki-Poly(alkylene terephthalate) granules-Ukumiselwa komxholo wamanzi

    I-TS ISO 1688 isitatshi-Ukumiselwa kokunyakama-Iindlela zokomisa i-oveni

    ukubuzaiinkcukacha
<< < Ngaphambili123456Okulandelayo >>> Iphepha 4/40
Cofa u-enter ukukhangela okanye i-ESC ukuvala