English
ibhanile3(1)
ibhena1(1)
ibhena2(1)
Umfanekiso oPhambili woMatshini woMfanekiso weNotshi yoMbane we-YYP-QKD-V
  • Umatshini wokulinganisa i-Electric Notch we-YYP-QKD-V

Umatshini wokulinganisa i-Electric Notch we-YYP-QKD-V

Inkcazo emfutshane:

1. Intshayelelo yeMveliso

Umatshini wombane wokulinganisa iiNotch Prototyping usetyenziselwa ukulungiselela iisampuli ezigobileyo zovavanyo lokuqina kwempembelelo yezinto ezingezizo zesinyithi kunye nabavavanyi beempembelelo ze-Izod kunye neCharpy. Ufanelekile kwiilabhoratri kumaziko ophando, kwiiyunivesithi, kubavelisi bezinto ezingezizo zesinyithi kunye nezinye iiyunithi ukuvelisa iisampuli ezigobileyo.

2. Imigangatho yokubhekisa yokulungiselela iiNotshi

  • I-ISO 180:2000Iiplastiki — Ukuchonga amandla empembelelo ye-Izod kwizinto eziqinileyo
  • GB/T 1843:2008Indlela yokuvavanya impembelelo ye-Izod yeplastiki eqinileyo
  • JB/T 8761:1998Oomatshini bokuvavanya impembelelo yePlastics Izod
  • I-ASTM D256:2010Iindlela zoVavanyo eziQhelekileyo zokuChonga ukuxhathisa kwempembelelo ye-Izod Pendulum yePlastiki
  • I-ISO 179:2000Iiplastiki — Ukuchonga amandla empembelelo yeCharpy kwizinto eziqinileyo
  • GB/T 1043:2008Indlela yokuvavanya impembelelo yeCharpy yeplastiki eqinileyo
  • JB/T 8762:1998Oomatshini bokuvavanya impembelelo yePlastics Charpy

Iinkcukacha zeMveliso

Iithegi zeMveliso

3. Iinkcukacha zobuGcisa

  • Ukubetha kwetafile yokusebenza: ＞160 mm
  • Isantya sokondla isixhobo: 30 mm/min
  • Iintlobo zeesampuli: Uhlobo 1, Uhlobo 2, Uhlobo 3
  • Iintlobo zeenotshi: Uhlobo A, Uhlobo B (ukhetho), Uhlobo C (ukhetho)
  • Umsiki wohlobo A: 45±1°, r=0.25±0.025 mm
  • Umsiki wohlobo B: 45±1°, r=1.0±0.025 mm
  • Umsiki wohlobo lwe-C1: 45±1°, r=0.1±0.02 mm
  • Umsiki wohlobo lwe-C2: Ubukhulu 1=2±0.1 mm, r≤0.1 mm
  • Uhlobo lwe-C3 cutter: Ubukhulu 2=0.8±0.1 mm, r=0.2±0.05 mm

4. Iiparameter zeZixhobo

  • Umsiki wohlobo A: 45±1°, r=0.25±0.025 mm
  • Umsiki wohlobo B: 45±1°, r=1.0±0.025 mm
  • Umsiki wohlobo lwe-C1: 45±1°, r=0.1±0.02 mm
  • Umsiki wohlobo lwe-C2: Ubukhulu 1=2±0.1 mm, r≤0.1 mm
  • Uhlobo lwe-C3 cutter: Ubukhulu 2=0.8±0.1 mm, r=0.2±0.05 mm

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Iindidi zemveliso

    Cofa u-enter ukuze uphendle okanye ucofe u-ESC ukuze uvale